Jump to content
SAU Community

Recommended Posts

Hey guys,

Can someone confirm that you can fit 18x10 +22's on a r32 GTR. I am thinking of buying a set. I know they will stick out a bit on the outside (thats what i like) but im more worried about the inside hitting the struts?

Also what size tyres would work, may need to stretch em? 235/35 or maybe 245/35's?

Link to comment
https://www.sau.com.au/forums/topic/148083-18x10-22-wheels/
Share on other sites

I doubt they will fit on the front. I've had 18x8 +38 on the front and they JUST fit. 18x10 +22 will stick in another 9mm. If you get a skinny enough tyre you could probably fit them.

On the rear, you will be fine

Link to comment
https://www.sau.com.au/forums/topic/148083-18x10-22-wheels/#findComment-2764392
Share on other sites

9 +22 will fit. I've got 9 +20 on the front of mine with a good amount of clearance.

You could get staggered sizes?

i think i might go with 18x9 + 8 instead which works out to give the same dish but more clearance on the inside and stick out just as much on the outside! :) I used to have a set of 18x9.5 +14 and it fit nicely too.

Link to comment
https://www.sau.com.au/forums/topic/148083-18x10-22-wheels/#findComment-2764600
Share on other sites

They will fit but you have to remove inter guards and roll the guards Front to rear.

EDIT:I see you already have 18x9.5 +14 with no mods so at the same ride hight 18x10+22 must come close to fitting? When i wanted rims the above is what i was told.

Link to comment
https://www.sau.com.au/forums/topic/148083-18x10-22-wheels/#findComment-2765694
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Impossible to remove the housing while turbo is installed on the manifold on the engine. So I have to do it anyways. I plugged it so there will not be any debris in there. Will vacuum aswell 
    • would a r34 gtr hood line up with gt/gtt stock fenders? after latch, front bumper and hinges are swapped for gtr ones? or would the fenders be too low or high in relation to the hood surface? ( I believe seeing somewhere that gtr front fenders use some type of riser for the sides, but do not know how that relates to stock gt/gtt fenders.)    
    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
×
×
  • Create New...