Jump to content
SAU Community

Recommended Posts

have a grand to spend on a system for a r33 (2 door). i listen to mainly rnb/hiphop and house, so bass is important and so to vocals.

dont know much about sound systems, you guys point me in the right direction?

the car has come with a sony xplode head unit and sony xplode 6x9s or some other size speakers not to sure, in the back, but i have heard that sony car system stuff is terrible, and should get rid of it if i am planning to get a decent system.

bass is very important, so i need 2 subs ! 12" i guess? do i need 2 subs for more bass? will 2 fit in a boot of an r33? but remember i also want good sound quality

what do you guys say i should get? whats the go?

which headunit, amp, sub/s, splits/tweeters, 6x9s? do i need 6x9s (somone said it mixes with the subs so it sounds crapper, dunno though)

thanks for all the help guys, really appreciate it.

Link to comment
https://www.sau.com.au/forums/topic/148274-1000-budget-for-sound-system/
Share on other sites

if u just like bass then stick with the speakers u already have, filter out all the bass from them if ur headunit can do it

get a nice monoblock amp and a couple of subs n u'll do fine

i might be selling 2 brand new pioneer 400w rms dual voice coil subs if ur interested

If you go for entry level components, you should be able to get a system for a grand.

Headunit, $300 - simple pioneer maybe, one preout for amp

Amplifier, $300 - something with a bit of grunt for bass

12" Sub + enclosure, $200

Front speakers $100

Rear 6x9's $100

Won't be the best system, but if $1k is your budget, ya cant go overboard.

If you go for entry level components, you should be able to get a system for a grand.

Headunit, $300 - simple pioneer maybe, one preout for amp

Amplifier, $300 - something with a bit of grunt for bass

12" Sub + enclosure, $200

Front speakers $100

Rear 6x9's $100

Won't be the best system, but if $1k is your budget, ya cant go overboard.

yeh sounds like bang for buck, its all i need, cheers mate

i live in Melbourne

melbourne? I got a full alpine system (cept for the head unit, which is a sony unit) for around a grand (or maybe just a bit more). 4 speakers, 2 tweeters, 2 crossovers, 1 amp and 1 sub. PM SXR (ray from re customs) - they are authorised alpine dealers.

melbourne? I got a full alpine system (cept for the head unit, which is a sony unit) for around a grand (or maybe just a bit more). 4 speakers, 2 tweeters, 2 crossovers, 1 amp and 1 sub. PM SXR (ray from re customs) - they are authorised alpine dealers.

So there's ya proof you can get a system for approx $1000. Don't let a salesman tell you to go away and come back with 3-4 thousand!

Not sure what stores you have over there, but over here i keep an eye on Tonkins catalogues, Strathfield, etc - and with christmas sales coming up, you should be able to get a good deal on your package.

So there's ya proof you can get a system for approx $1000. Don't let a salesman tell you to go away and come back with 3-4 thousand!

Not sure what stores you have over there, but over here i keep an eye on Tonkins catalogues, Strathfield, etc - and with christmas sales coming up, you should be able to get a good deal on your package.

it depends on where you go to get your stuff. plus i kept my headunit that came with the car, cos it was running well. And I also got a good deal on the products - without the deal I would be looking at around 1.5 - 2k i think - plus there are other brands (other than alpine) which are more expensive..... so what Chris said was right - there are some brands where you can expect to pay 3-4k for the best of the range.....and this might include labour as well.

p.s - alpine have the top of the range audio equipment too - that can go to about 3k all up....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
×
×
  • Create New...