Jump to content
SAU Community

Defects!

NYTSKY

By NYTSKY,
in New South Wales

 Share

Recommended Posts

NYTSKY Grand Master

NYTSKY

Posted
Posted

OK in the past 2 weeks ive been defected 2 times.First time was for blow off valve.

Second time was for exhaust and my HIDS.

The first copper said my exhaust was fine but not to go any louder.

The second copper was a prick and wrote me up anyway.Today i went to get it tested and i was 4DB over(shit) so i went and got a standard exhaust put on.But the thing is i have to give it back in two weeks(loaner)

Seeing as my other exhaust was only 4DB over what can i do to it to make it quieter without comprimising flow.The standard system has robbed so much power out of my car its not funny.Can anyone in the same boat help me out?Options? Is there quiet high flowing systems on the market?

CHEERS

Dave

Link to comment
https://www.sau.com.au/forums/topic/148346-defects/
Share on other sites
NYTSKY Grand Master

NYTSKY

Posted
  • Author
Posted (edited)

I guess ill have to try the centre muffler option.Going from high flowing to standard exhaust is a huge decrease in power.Amazing what a high flowing exhaust can do for turbo cars.

Edited by NYTSKY
Link to comment
https://www.sau.com.au/forums/topic/148346-defects/#findComment-2769671
Share on other sites
NYTSKY Grand Master

NYTSKY

Posted
  • Author
Posted (edited)
yea bud the best option is to get another centre muiffler as the others on here have said... the hks super dragger exhaust i have has a centre muffler and a hotdog aswell... its pretty quiet so that should do the trick for ya

My one is a fujitsubo.the guy testing it was suprised that it was over cause its pretty quiet.The standard one i have on now is 88.5db. My aim is to find a system that is 90db but provides the same flow as my fujitsubo one.There must be a market out there for legal yet high flowing exhausts.

Edited by NYTSKY
Link to comment
https://www.sau.com.au/forums/topic/148346-defects/#findComment-2769736
Share on other sites
so_tred Proficient

so_tred

Posted
Posted
Now on the subject of defects.I have an intercooler in the garage ready to put on.Are they a defect.A hole has to be cut into the engine bay to fit it.

If you're cutting a hole in the engine bay you're going to have to get that engineered, otherwise = defect?

(Going by what happened to a friend of mine)

Link to comment
https://www.sau.com.au/forums/topic/148346-defects/#findComment-2769969
Share on other sites
Sky GTR Nguyen Explorer

Sky GTR Nguyen

Posted
Posted

Go to Mr. Muffler - get a Muffler that's within the legal DB limit - get the guys to write you up a report stating that it's legal - make a copy of it and keep it in your car...

When a copper pulls you over - show them the paperwork and that will shut him up.

That's what I've found...

Link to comment
https://www.sau.com.au/forums/topic/148346-defects/#findComment-2773850
Share on other sites
TRUBLSM Mentor

TRUBLSM

Posted
Posted
Simple get an exhaust that complies.

There are some made by kakimoto and fujitsobo that are legal.

they have a 92 or 96 suffix on the model names.

can't just get an exhaust that applies, it needs to be engineered to say that it comply's with the australian design rules.. i was defected for my exhaust, and mind you my exhaust is under the dB rating.. i was told that if i didn't have a engineered certificate to say that it complys with the australian design rule then they can keep defecting me..

simple answer: Either know someone dodgey to clear it like i did... or put the stock one back on.

Link to comment
https://www.sau.com.au/forums/topic/148346-defects/#findComment-2776038
Share on other sites
JAS-25T Grand Master

JAS-25T

Posted
Posted
can't just get an exhaust that applies, it needs to be engineered to say that it comply's with the australian design rules.. i was defected for my exhaust, and mind you my exhaust is under the dB rating.. i was told that if i didn't have a engineered certificate to say that it complys with the australian design rule then they can keep defecting me..

simple answer: Either know someone dodgey to clear it like i did... or put the stock one back on.

This is true. Although, if you are defected for noise - my solution would suffice.

If you are defected for no ADR compliance - your solution would be the only one.

Link to comment
https://www.sau.com.au/forums/topic/148346-defects/#findComment-2776057
Share on other sites
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Nice....looking forward to that update
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Neg, the top one is actually for the front. The sizes are 18x10.5 +18 and 18x11 +32.   I measured many times but I'm sure I'll have problems as this is the thread for problems.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Just one thing; tapping tapered threads is tricky. Taps are always tapered and you would generally run it as far as you can, but with a tapered thread you have to stop much sooner otherwise the wide part of the taper will run in too far and you will have to thread the sensor in too far too as well (possible that it will never make a good seal) BTW nice wide wheels, I guess the top one is for the back!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Welp, good to know. Will have to wait awhile until steady hands with drills and taps are available. In other news, these just arrived! I will weigh them for posterity. Edit: 11kg each (or 10.9/11.1 depending on what my scale decides over multiple tests, the 18x11 don't seem to weigh noticeably any more than 10.5)  
×
×
  • Create New...