Jump to content
SAU Community

Recommended Posts

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

thanks for the input jerome,better post up your mods and the performance results after fmic install,and buy the way can anyone enlighten me to the benifits of returnfeed over conventional piping,is there any diff in length? would one have more lag than the other? has any stagea owner noticed lag after upgrade? ....maybe a 33 owner might be able to answer my nosey questions

yea will do just gona keep the mods basick . fmic , pod , 3inch exaust turbo back boost controll and looking at geting a haltec interceptor ecu(piggyback) then get her on the dyno.didnt notice any major lag issues with new fmic

yea will do just gona keep the mods basick . fmic , pod , 3inch exaust turbo back boost controll and looking at geting a haltec interceptor ecu(piggyback) then get her on the dyno.didnt notice any major lag issues with new fmic

Hi Jerome,

did u have to relocate the washer bottle?

any btw...does the cooler piping touch the radiator hose?...coz not sure if over period if it rubs..might wear the radiator hose thin...dont want the hose bursting unexpectedly.

Well its christmas time and I had a free day to stick my front mount in!

The install went pretty well. I bought a cheap Just Jap R33 kit, and suprisingly everything lined up pretty well.

I had to make my own lower brackets that were longer than the ones provided, and dropped the intercooler 30mm to ensure it would fit under the top of the front bar. Other than that it all came together much quicker than I expected!

Now it has brought up a few little problems!

I had to remove my windscreen washer pump and bottle to make way for the piping! So now i cant clean my windows! Has anyone had this problem, and know of a good solution? like a smaller bottle that works?

It now hits boost cut all the time too! so i had to put the standard little brass restrictor back in the vacume to the turbo. Will an SAFC II be able to overide boost cut? I understand the ECU takes a value from the AFM to determin the cut off...

Also I cant run the intake feed for the standard air box because it fouls the new piping...

I dont really want to run a pod, because they are loud and i want to keep this thing as sleeper and stealth as possible, but it looks like i have no choice, does anyone know a quiet pod? (haha a weird question i know!)

Any help here would be awesome! thanks guys!

Ben.

cooler%20small.jpg

i fitted mine today i turned the washer bottle around so its a side mount now lol had to modify the brackets etc but fitted in ok and still the filler neck is in the stock position i also modified the intake scoop by heating it wit a hot air gun till is soft then fitted it on and pushed down on it and now fits like stock and dont look like its been modified at all ill post pics when i get a chance .

hey mike, did you move the trans cooler and convert to electric fan?

Im looking at doing my FMIC soon. Any other things to watch out for?

left tranny cooler in place and trimmed the fan blades a little to clear the top pipe i had to bring the fmic out a little to clear the cooler which ment i had to cut into the bar a little more than usual but it worked out fine

Nice work there lads.

Im using the Apexi fmic suited for a 180sx, its a return air feed type, its made of both Tube-and-Fin and Bar-and-Plate design, so got the best of both worlds.

There is no noticeble extra lag worthy of mentioning after the install (maybe a touch, but thats as to be expected). Once tuned tho the car performed very well.

Now with the higflow turbo on, awaiting a tune, I expect it'll perform better, lol :pwned:

I also have an ARC return feed type frontmount, and i cant notice any more lag at all then when i had the standard intercooler, and i am making as much power as anyone else with same mods ie: Alex and he had a gtr cooler, in my opinion there is less piping with a return feed cooler than there is with the other type so technically there should be more lag with the other setup

Simon

left tranny cooler in place and trimmed the fan blades a little to clear the top pipe i had to bring the fmic out a little to clear the cooler which ment i had to cut into the bar a little more than usual but it worked out fine

neat job on the snorkel by mike (and mitch).

  • 3 weeks later...
post-26949-1171185291.jpg fitted up my fmic and when i removed the stock pipework there was a small hose that comes from what looks like a solonoid on a compressor and conected to the pipe that feeds the plenum it had a smaller pipe pressed into it to which the rubber hose im refering to was atatched.the new pipe fittings do not have provision for this .....where do i connect it now? any ideas guys????? Edited by mike40sydney

a few ideas...

GREDDY INTAKE PLENUM...

no piping over the fan, 1m less piping... better response!

easier to get to spark plugs...

Thats what i'll be doing when it comes time to upgrade the Stagea!... indeed

just a more expensive way to do it.. but better in the long run!

Tony B

YNOTSX?!

.. the radiator hose is touching but theres not much pressure there...

I think you'll find that 'Pressure' is not the governing factor - vibration is. If the pipe and hose are touching they will rub and wear through. If you can zip tie them to stay apart, then zip tie them together firmly. Better still, cut up a 2 inch length of old hose and wrap it around the radiator hose - held by zip ties, at the point were the hose and pipe touch, this will act as a barrier that it has to wear through before it gets down to the radiator hose.

Edited by 3intheBack
there was a small hose that comes from what looks like a solonoid on a compressor and conected to the pipe that feeds the plenum it had a smaller pipe pressed into it to which the rubber hose im refering to was atatched.the new pipe fittings do not have provision for this .....where do i connect it now? any ideas guys?????

The extra hose you now have is the one that goes to the power steering pump, - I would assume it controls a pressure switch that bleeds off excess fluid pressure at high revs - otherwise you would loose all feel in the steering at high speed.

Since it works by reading the boost pressure in the intake plenum, you simply need install a T piece into some other line that is registering boost pressure. They will have given you a spare metre of hose with the kit.

I joined it into the line that runs from the turbo to the boost controller since it was close by.

Personally I am not sure if this alters the boost pressure signal going to the boost controller - which would be a bad thing.

Or you could run in over the top of the motor and attach it to one of the nipples that you would use for the boost gauge.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...