Jump to content
SAU Community

  

65 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

  • Replies 111
  • Created
  • Last Reply

Top Posters In This Topic

Looks like the one I nearly got a year back, a nice white import turbo MX-5

you mean the pics i posted up before :) i dont know how you could have acquired that one, its GARAGE VARY's centre piece. they wouldnt part with it. unless someone else has a kit in oz as well :)

if this was your astina then it would use the same mounts. prob is both the familia and the astina are east-west mounted. mx5 is north-south. i know that they could line up fine, but there is a chance they might not. main concern is the turbo and manifolds etc. they could get in the way.

let me think..............everything will be on the left side of the engine if mounted in mx5. so i'd either have to get a new manifold made up and shift everything or i could be lucky and it might fit? not too sure :)

i had an idea today actually. was browsing the net, and found a couple of shells for sale. think it might be cheaper to buy a shell and then go from there rather than chop the car to pieces. not sure on the idea yet but will look into it more.

with the gearbox, we were planning to put either a 5sp supra box or rx7 box in, both of which are pretty strong and can take a bit of abuse.

with regards to the familia engine. i think the only issue wit the transplant would be the mounts. the engines themselves arent too different. if i managed to get a BPD, and put it in a 1996 model (1.8 with popup headlights) i dont think there would be too many problems. they are the same engine block really. the familia has the bpd while the mx5 only has a bp. so i dont think there would be any issues there except making new mounts.

i'm looking at purchasing a racing hardtop from bullet, they are about 4500 (1500 more than stock ones) but have extra supports (i think its like a mini roll cage) built into the roof and heavy duty latches in case you do flip it. i will also install the rollover bars as well and racing harnesses. also, they do have a soft top standard so rain isnt really an issue?

Either way man, if you cant put the bpd in, if its almost the same all the pistons and that shouldnt be too hard to get a hold of, the only reason I see a problem is I know other people who have tried the fwd engine, to rwd engine thing, and found it a lot harder than they thought, they did get it done, just a signficantly more cost than planned, something to do with gearboxs and clutches from memory, along with a few other small hicups. Just a bit of reasearch should sort it out.

But if you can get a good quality hard top, go for it hey man. It should be fairly reliable, obviously quick, good range of suspension mods for them. Common enough to not get hassled by the po po, yet still different enough to get a bit of interest.

I personally would still stick with the piston motor, I think it would be far less hassles in the long run, and just turbo the stocker until it blows up which gives you more time to save (ie money saved can be earning you some interest or something, pay off a bit more of your loan if you got one or whatever).

But yeah, go for it hey. Its just the 2 seat thing :laugh: Make sure you can live with only 2 seats.

turboing a stock BP will last all of 2 months on the outside, and you will have to go with aftermarket management (which would prob help anyway...)

I dont think turboing the stock engine for the intrum is a good idea, its wasted money, if it blows its liable to take the gearbox or turbo or something else with it.

yeah, 2 seats are fine with me. i usually only let one person in my car anyway so it should help :laugh:

i didnt really like the idea of turbocharging the stock engine, unless i put the forgies in it. but it would still end up costing bout 5k to turbo the stocker. for that price i could have a better engine. i know for a fact that a B6T fits in just fine as there is one going round with it in it, it pulls 10's down the quarter too :)

i found out that my mechanic is back from holidays now so i'm gonna pay him a visit and see what he thinks. he's pretty good with these sort of things, plus he'll put a mod plate on almost anything as long as he does the work :)

looks like its settled, we're keeping the stock engine. this is what my friend, the one helping me build it said.

QUOTE(70XIN @ Jan 6 2007, 09:17 AM)

MX5 B6 (stock engine)

-Manifold

-Td05-big 16g/Garrett GT28RS

-Big Hybrid Cooler

-Pod

-Piping + silicon bends

-Microtech LT-10s

-3" Dump pipe and Exhaust

-RX7 injectors

-Make an airbox for the pod

-Coilovers

-Strut Braces

-Kit

-Wheels

Goodluck to *most* cars keeping up with that on a mountain .. plus, in a straight line on 10-12psi, you will spin 2nd with ease

When shit breaks

-RX7 box and diff

-Forged rods and pistons

Running 20-25psi. Faster than the GTiR by a heap .. except from a standstill .. traction will be teh funneh!

You have my list That's what i always wanted to do.

I still think your waisting your time with the hole Mr5 thing. Sure spend 20 k on it and you will get

250kw easy and it will sound like a beast but hello gtr = wtf > you in a race. Sure you may not be interested in raceing now but sooner or later your going to want to and when you get blased by a GTR down the road and you want to race your tyre spin and lack of body weight is going to be the end of you.

Sure Mr5 Cheaper to mod and you can have a load of rear wheel fun with it * Burn outs *

But its nothing a GTS-T cant do and people take a skyline more seriously.

Thats my opinion ofcorse and if i was going to but another car it wouldnt be any of the ones you listed

Honda NSX Super Sport S series for the win

the reason i'm avoiding the GTR is: firstly, the price tag. just cant afford it. to buy and maintain a gtr right now would send me broke. secondly, i dont want to go awd again i decided. not till i can drive a rwd to almost its limits. once i have done that, then i will move onto another awd.

i'm not interested in straight line stuff anymore, anyone can do it. i want to challenge my self, not others. i'll get more satisfaction from beating myself than someone else.

also, honda nsx is not cheap and waaaaaaaay outta budget.

looks like its settled, we're keeping the stock engine. this is what my friend, the one helping me build it said.

QUOTE(70XIN @ Jan 6 2007, 09:17 AM)

MX5 B6 (stock engine)

-Manifold

-Td05-big 16g/Garrett GT28RS

-Big Hybrid Cooler

-Pod

-Piping + silicon bends

-Microtech LT-10s

-3" Dump pipe and Exhaust

-RX7 injectors

-Make an airbox for the pod

-Coilovers

-Strut Braces

-Kit

-Wheels

Goodluck to *most* cars keeping up with that on a mountain .. plus, in a straight line on 10-12psi, you will spin 2nd with ease

When shit breaks

-RX7 box and diff

-Forged rods and pistons

Running 20-25psi. Faster than the GTiR by a heap .. except from a standstill .. traction will be teh funneh!

You have my list That's what i always wanted to do.

Missed one MAJOR thing off that list dude. BRAKES!!!

breaks arent important when building a fast car daveo, dont you know that? :kiss:

Mike you were going to buy the MX5 from the word go with this thread. The majority vote was for a 32 GTR, yet you completly discarded this and went with the MX5 anyway.

Im not saying dont buy what you want and im not saying follow the trend or popular oppinion, but why ask for it when you dont particually care what everyone says? Or was it just to see if your MX5 idea was popular?

In any case, you will need much better breaks then the stock MX5 ones, and forgies and B6T rods from the outset, otherwise this project will just end in tears.

breaks arent important when building a fast car daveo, dont you know that? :)

Mike you were going to buy the MX5 from the word go with this thread. The majority vote was for a 32 GTR, yet you completly discarded this and went with the MX5 anyway.

Im not saying dont buy what you want and im not saying follow the trend or popular oppinion, but why ask for it when you dont particually care what everyone says? Or was it just to see if your MX5 idea was popular?

In any case, you will need much better breaks then the stock MX5 ones, and forgies and B6T rods from the outset, otherwise this project will just end in tears.

Not picking on you exclusivly here dude, but... This is a car site, so I think this needs to be addressed, to everyone who makes this mistake read the below.

Brakes is what stops your car.

If your brakes dont work, you break your car.

So lets go over that again. On a car its Brake. In music is breaks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...