Jump to content
SAU Community

Recommended Posts

hay i got my 600x300 cooler installed yesterday, and since then when every i hit boost it sounds like its hitting the rev limiter. i have to take the car back to the shop but wanted to have a few ideas of wat it may be before i go there.

thank u

it was running stock boost before the cooler was installed but have noticed that the boost was higher since the install, can FMIC cause boost spiking? and i hope it isnt the plugs coz i got a set of platinums the last month.

so if it is hitting the boost limiter how do i fix it?

well not actally have heard the car, if the pug gap is to big, ie the stock 1.1mm and the coild are a bit week, the denser air causes the coil to work harder and you get a brake down of spark. This happend to me, i had to go all the way down to 0.6mm just to idle, and .55mm to run.

The problem is you can't regam platnums to easily, or arn't suppose to. go out and buy a copper set, the shop will know which ones, and buy the ones that are gapped to 0.8mm. Put these in and see how it goes. It is most propably the spar.

If it is hitting R&R, which i unliky, if you are running stock boost, then you may need an SAFC II air flow computer or a full computer to fix it. The ecu detect that there is to much air comming into the engine, and retards the ignitions and hence limits the boost.

Hope that helps

Hey dude i had the same problem aswell on cold nights, probably have a look at your coil packs cos its a common thing to have hairline cracks in em causing the missfire when the rpm is around 4.5k - 5k, theres a few topics here on how to do a quick fix on em which suprisingly helps! And the gap on the plugs i've noticed alot of people gap em down to .8..

i took it back to the exhaust shop and they found a vacum hose that had melted shut and problem seems to have gone, i still wonna take it to a dyno to check a/f ratios and get it tuned.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...