Jump to content
SAU Community

The Progression Of My R33 Series 1 Skyline

Mr-Toy33

By Mr-Toy33,
in Engines & Forced Induction

 Share

Recommended Posts

Mr-Toy33 Grand Master

Mr-Toy33

Posted
  • Author
Posted
where do u get a front grill like that? did it come with the badge or did u have to stick one on?

The grill came with the car. My understanding of this grill is that it came with all series 1's. Not 100% sure on that though... thats just what i been told by some ppl.

Now there's a step in the right direction, also car has come a long way mate good to see you kept it and continued to mod it. i think get rid of the wing and put a drift lip on the back, and finish off the rest of the kit.

Thanks man... only got sideskirts, review exterior side mirrors and rear-wing to go :D

Hey John, did you paint the dash?? What paint did you use?? How did you remove that shitty coating that is on the dash originally?

The current coat in the car was done by dan... I brought some stuff from supercheap and did it in dan's garage one night but came out disgusting. Dan brought some other stuff and re-did it for me and turned out to what it looks like today.

There is still a bit more to do with the respraying of the inside... wanna do the arm rest on the doors, etc as well.

impact_blue Grand Master

impact_blue

Posted
Posted

John, your grill is a series 1.5 Otherwise known as the 'airbag' model ;)

PS. When are you ditching the shopping trolley wing?

PPS. Nice work :) I've been watching this car since you got it. Many late night trips to Yatala & random photo shoots with dodgy borrowed cameras later, it's looking schmick :D

Mr-Toy33 Grand Master

Mr-Toy33

Posted
  • Author
Posted
John, your grill is a series 1.5 Otherwise known as the 'airbag' model :)

ok, a 1.5 series it is!

PS. When are you ditching the shopping trolley wing?

when bunta gives me the gtr wing :D

PPS. Nice work :O I've been watching this car since you got it. Many late night trips to Yatala & random photo shoots with dodgy borrowed cameras later, it's looking schmick ;)

yes and now i finally have my own camera!

woohoooo yeh

  • 3 weeks later...
Mr-Toy33 Grand Master

Mr-Toy33

Posted
  • Author
Posted

well, did a engine compression test the other week at shanes and the engine is in perfect condition for its age and the k's that have been clocked up.

still possibly looking at doing a engine rebuild over the next few months though along with a turbo upgrade and highmount manifold.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • funkymonkey
      Jacks that fit under GTR lips that can reach the subframe?

      By funkymonkey · Posted

      I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...