Jump to content
SAU Community

best turbo for 0-100km/h

playa
 Share

Recommended Posts

DLuded Mentor

DLuded

Posted
Posted

Simply get more power to get better times

It really depends on how much money you have to spend

First probably get a full exhaust, then air filter, then cooler and up the boost.

After doing those standard mods you can do bigger things like change the turbo

Also because you have a gtst it'll be hard to beat a wrx off the lights because they are AWD. You will catch up to them once you get traction after some simple mods

benm Grand Master

benm

Posted
Posted
Originally posted by playa

yea i got exhaust air filter intercooler, so next step get....

* Exhaust Cam Gear ($250)

* Boost to 10-12psi ($200)

* PowerFC ($2000)

* Good quality tyres ($1100)

* Pineapples ($150)

Forget the bigger turbo, the extra power you make out of it will be lost in hitting boost and putting the power to the ground. You want a constant steady power curve to give you instant power and the stock turbo will deliver more than enuff power for this.

If your -really- after a 'bigger' turbo just get the stock turbo hiflowed, once again it will deliver more than enuff power and will boost up similar to the stock turbo.

Now how many people spend heaps of money on their engine but forget that somehow they actually have to put all that power to the ground? Do yourself a favour and buy a set of good quality tyres (back atleast).

Pineapples will give the rear end better squat and will force the car into launching harder in a straight line which is exactly what you need.

Note: The only experience I have is reading forums, not putting theory into practice. But thats only until I get a good set of tyres.

dAVE Grand Master

dAVE

Posted
Posted

okay, nice wide wheels at the rear will help.. trust em i know.. i have shit tires and it sucks getting off the line. Even with minor mods and only 10psi i can boot it any surface or i get wheel spin :)

My car also has a different diff, which gives more accel, less top speed - to changing your diff to a higher ratio should also help. I think a std is a 4.11, so a 4.5 or more could be good. Only thing it will put your highway revs up a bit - mine revs at 3100rpm at 100km in 5th, compared to 2700 rpm std.

Jay95R33 Grand Master

Jay95R33

Posted
Posted

After exhaust and more boost, I'd look at getting the power to the ground.

Good tyres

Good alignment

Clutch/flywheel

Suspension setup for drags (pineapples etc)

Mechanical diif (2 way etc)

And as dAVE said, higher final ratio.

And lot's and lot's of practice.....

You may not need to do all these things to beat a WRX, but hay, why not :)

J

dojobi Experienced

dojobi

Posted
Posted

All you really need is some aftermarket management I reckon. A Super AFC or preferably a Power FC should give you that bit extra to get ahead in the 0-100. Just practice your launches. It's easier to launch a Skyline than a WRX (assuming they aren't doing a clutch dump - and if I owned a rex, I'd be taking care of my gearbox) as you can get some wheelspin to stop bogging off the line, and they can't.

Ender Community Regular

Ender

Posted
Posted

You just need to get off the line better...

Pineapples...

Adjustable rear upper arms...

maybe bigger rubber rear but you could just try really good rubber first...

good clutch...lighten the flywheel while your changing it...

Maybe a mechanical diff if you're really serious or lock it if your too serious.

You may need more power but even iof you do later, you will still need these mods to get the power down effectively, they are cheap (relativly to some of the engine mods suggested above) and will get you off the line like a rocket...

I think you would be surprised at the difference this would make.

cheers

russ

Ender Community Regular

Ender

Posted
Posted

If you have enough power is it actually better to have longer gears so you dont waste time changing gears....ie you have enough power to spin the wheels way too much all through second and into third anyway...

If you had a very low ratio diff like a 5.1 it would technically accelerate faster in gear but you might have to be in third to get to 100km/h...wasting time changing gears and much wheel spin...if you had a 3.9 or a 3.7 you might just make it to 100km/h in first??

You have to have enough power though...

Not too sure

Russ

Cubes Grand Master

Cubes

Posted
Posted

Get a set of wide normal profile soft sidewalled tyres.

I.e Simex in a 225 50' 16" grip on my car very well. I can launch with them up around the 4500rpm mark with bugger all wheel spin. Simex are cheap, not rotational and spin like hell in the wet, a very dangerous tyre in the wet. I almost lost it by ever so slightly coming on to high boost in third gear at a low rev.

For a decent amount of sidewall flex, so that the tyres is flattened out on to the road when you launch you need at least a width of 4 fingers. Side wall width that is. :)

It is pretty difficult to beat a WRX off the line.. Even GTR's have trouble.. WRX's are full time 4wd that is why they break so many gearboxes.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      After market rear camber arm adjustment

      By GTSBoy · Posted

      Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
×
×
  • Create New...