Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

just wondering, i have a lockbar and noticed the other night that with the car jacked up, and rear wheel off, i can grip the rear disc and "turn" it 1mm in/out, as in i can see the tie rod move in and out of the lock bar 1mm. seems a bit too much slop to me?!!

how would i fix this? get a new lockbar? or tie rods? Both?

how does this bar look..?

anyone dealt with these guys. maybe a good option till gtrgeof starts up again.

http://cgi.ebay.com.au/NISSAN-Skyline-R33-...1QQcmdZViewItem

also cameronBNR32 i like the Abflug front lip diffuser in ur pic.

just bought this lock bar the other day for my R33 just gota fit it, paid $119 delivered

Edited by YLD-180

I dont know what you lot are on!!. I race my R32 and I havnet had any problems on the track yet. feels fine to me.

i was going to try the cheaper option of using some cut washers to stop it working to see what the difference was. but really, the only trouble ive had cornering is the blokes in front of me holding me up!!!

I dont know what you lot are on!!. I race my R32 and I havnet had any problems on the track yet. feels fine to me.

i was going to try the cheaper option of using some cut washers to stop it working to see what the difference was. but really, the only trouble ive had cornering is the blokes in front of me holding me up!!!

haha.. must be wrxs... lol

how do u normally go about with the hicas oil lines on the R32 GTR.? leave them on? and bung them up or remove?

what a guess.. :mellow: i had a huntch.. lol

and the EVO's. im told they suffer from a bit of turn in understeer. i can monster all the guys i race with in corners, i just havent quite got enough power for the straights. but mine is still standard apart from a pod filter and now a 3'' straight through/side exit exhaust(no muff/cat) which im taking to the track tomorrow to see the difference. im hoping it will be noticable.

no intercooler oil cooler? im not game to go track without supporting cooling mods.

let us knw how u go.

havent had any prob's yet. standard intercooler. we have to make up a better cooling suround for the pod filter. at the moment its only a thin sheet of aluminum.

track test didnt go as well as i thought it would. since we did some suspenion changes, dad did a rough wheel alig on it i only used my road tyres which are slippery as hell to see how the trye wear was. exhaust didnt seem to make much difference but then again i was still pulling the same speed on the straights with slower corner speed so i wont really know till my next race meeting on the 25th. i wished id takin the race tyres now. dad did a wheel alig with wood and tape measure and he's done a good job. then again he has been doing then for 30 years. and i really need to lock the diff cause im lifting the inside rear to much and losing traction.

Edited by johnGTS-t
decent effort keeping up with wrxs and evos in a standard GTST >_<

Cheers! Its manily due to the circut i think, or im just grreeaatt LOL

they have it over me on the straights though. but yeah, for what it is im doing ok.

once we've upgraded to somewhere near their standard, look out! but it all takes time, and money.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...