Jump to content
SAU Community

Recommended Posts

  • Replies 255
  • Created
  • Last Reply

Top Posters In This Topic

anyone ELSE recommend any products to use to make my car shimmer?

:)

I recommend FW1 racing formula. Does your windows, rims, body work and engine bay, and anything else you may want to wax... :) Seriously good stuff i tell you.

Hey guys, here's an updated list for you for our position at the show.

Due to smaller expected turn outs for clubs they have moved us to a bigger position (42) We are also known as Skylines Australia, not the Japan/Australian Extras. See attached, hope you're all looking forward to it! :) Oh have also made a banner as I said I would, not sure where it will go/hang could drape it over my bonnet lol!

wheelsexpo_2.doc

Perhaps get a couple of long pieces of timber/dowel/steel pipe tied into each end and jam them into the ground near the front of our area?

Also, relating to the 'Marshalling', is there events cars are entered into for prizes or something, or is this just the term given to directing and parking your car?

Terminal and I will be at the show at 8am, to see if we can stake down our area so to speak. As long as everyone else turns up before 9am, should be fine. Probably a good idea to cruise from the museum to the show. Take some pics too :)

So is this the final list?

SL33KY

Terminal

Baconer

Frink

Donnan

Kabala (now known as S T A R 3 3)

Supadan

Leech

a20089

1JRocket

Rumble

CeJay

ib6ub9

Dereck (Fifth Gear Motorsports

zooee (Robert)

r33skyflyin

GT-PASSAGE

TeeJay

Widebody32

aus spec 32

ozR32gtr (Tentative)

SupaFly Skyline (Tentative)

Thats 22 cars. Is anyone else coming? Anymore r31's? Any late dropouts?

So is this the final list?

SL33KY

Terminal

Baconer

Frink

Donnan

Kabala (now known as S T A R 3 3)

Supadan

Leech

a20089

1JRocket

Rumble

CeJay

ib6ub9

Dereck (Fifth Gear Motorsports

zooee (Robert)

r33skyflyin

GT-PASSAGE

TeeJay

Widebody32

aus spec 32

ozR32gtr (Tentative)

SupaFly Skyline (Tentative)

Thats 22 cars. Is anyone else coming? Anymore r31's? Any late dropouts?

I think it's safe to assume Leech will not be attended due to his previous comment of being in NZ.

Thats 22 cars. Is anyone else coming? Anymore r31's? Any late dropouts?

Only me and one other person with a R31 will turn up. Apparently, it's too early in the morning to go for a drive.

SL33KY

Terminal

Baconer

Frink

Donnan

Kabala (now known as S T A R 3 3)

Supadan

Leech

a20089

1JRocket

Rumble

CeJay

ib6ub9

Dereck (Fifth Gear Motorsports

zooee (Robert)

r33skyflyin

GT-PASSAGE

TeeJay

Widebody32

aus spec 32

ozR32gtr (Tentative)

SupaFly Skyline (Tentative)

Stinkypoo

Driftmajik

ok the final list unless someone either comes along or drops out is:

SL33KY

Terminal

Baconer

Donnan

Kabala (now known as S T A R 3 3)

Supadan

a20089

1JRocket

Rumble

CeJay

ib6ub9

Dereck (Fifth Gear Motorsports

zooee (Robert)

r33skyflyin

GT-PASSAGE

TeeJay

Widebody32

aus spec 32

ozR32gtr (Tentative)

SupaFly Skyline (Tentative)

Stinkypoo

Driftmajik

Frink is out as well due to car troubles bad ones ;)

So 22 Cars if you are coming but not in you car for any reason please let us know on the forum so we can get an idea of how we can fit in all the cars please.

Thanks and see you at the show :(

So is this the final list?

Thats 22 cars. Is anyone else coming? Anymore r31's? Any late dropouts?

I will have to confirm later tonight as the car is still in at the workshop getting new injectors and a tune. There may be a possiblilty that I may not get her back til next week. ;)

Cheers,

Brad

Sorry guys, you'll have to count my gtr out(the reason is outlined below) :)

I was really looking forward to this, I will however come along and take some photos though.

I have been right royally screwed over by an un-named fuel injector supplier!

Basically(or not so basic),

I ordered some new injectors. I thought they were the wrong ones when I got them, so I rang the supplier and quoted the part number they had sent and quoted the part number i thought they should have sent

The problem was that the right part number was on the invoice but the wrong part was sent(I did not have the invoice), but the really infuriating thing was that I had actually quoted the part they had sent but instead of listening to me in the first instance, the supplier got defensive straight away and they black and blue(quite rudely too) that they were right.

So...... I went ahead and cut the plugs and fittings(as per instructions from supplier, I rang about that too) off the old ones, dropped the new injectors in and took the car to the workshop(Tuesday) to get tuned.

Got a call from the workshop and they agreed with me that they thought that the injectors were wrong too. After bouncing many calls between the workshop and the supplier, the supplier finally admitted that they had sent the wrong injectors. They wanted me to send back the first lot before sending out the right ones, but after giving some CC details they sent out the right ones which the good lads at the workshop fitted up for me today, I thought all was good til I found out that the supplier hadn't sent out the fittings or plugs for the new proper injectors!!!

So......my baby is still sitting at the workshop with new injectors(the right ones) bolted in but with no way of running the car til the supplier sends the fittings.

Oh, and to add insult to injury they were going to try and charge me for the new fittings@!@!

BTW a huge thanks goes out to the boys at Trojan, they have shown great patience this week.

End of rant....

Cheers from a not so happy Brad.

Yay, I'll be coming with Sumanator(James) in his R31.

SL33KY

Terminal

Baconer

Donnan

Kabala (now known as S T A R 3 3)

Supadan

a20089

1JRocket

Rumble

CeJay

ib6ub9

Dereck (Fifth Gear Motorsports

zooee (Robert)

r33skyflyin

GT-PASSAGE

TeeJay

Widebody32

aus spec 32

Sumanator/ozR32gtr (Tentative)

SupaFly Skyline (Tentative)

Stinkypoo

Driftmajik

Cheers,

Brad

Edited by OZR32GTR

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I've got a 2011 J50 that I imported six years ago. The unmodified factory AV system date and time has always been correct ( Japanese timezone of course ) up until last month. About two weeks ago, at engine start, the system wished me a happy new year ( in Japanese of course ). I can't think of anything that would make the system think that the date had changed, unless the GPS component has failed/reset somehow ? I checked the GPS reception in the system settings, and it can still see the satellites. Has any other J50 owner had this happen ?  It's no biggie, just annoying that it tells me the wrong date anytime I start the engine. 😅
    • Love following your adventures on IG, hopefully if you're still around in Japan when we visit again wouldn't mind going for a few beers with you (that's if you're keen on hearing how I hate Nissans).
    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
×
×
  • Create New...