Jump to content
SAU Community

Difference Between R33 Series 1 And Series 2 Cat's

Sambo33gtst

By Sambo33gtst,
in Engines & Forced Induction

 Share

Recommended Posts

SKYHY Collaborator

SKYHY

Posted
Posted

one is newer then the other one :P

from what i know the coil packs are different the ignitor is spreate form the coilpacks and the inside is different does this answer your question?

Does anybody know if there are any vast differences at all between the two?

Cheers guys.

P.S. Yes i hit the search button.

Sambo33gtst Proficient

Sambo33gtst

Posted
  • Author
Posted

ummm goes close to answering.

Im more concerned about the outside of the cat, as im fabricating up a cat of my own but its going to be modelled off a S2 for a S1. So im just qualifying whether there are any major changes to the exterior of them...i.e: flange bolt spots and sizing etc etc...

cheers.

Tangles Grand Master

Tangles

Posted
Posted

Im fairly certain a cat converter for a RB25 nissan fits all the R33's (series 1, 1.5 and 2) and the Stagea's (series 1 - unsure of series 2), therefore theyd be the same from 1993 thru to 1997.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      WGNC34 - floor mats

      By GTSBoy · Posted

      I dunno about that as a blanket statement. Pitwork is Nissan's "Nissan genuine" thing, and for stuff like timing belts, I have found them to be excellent. Of course, for things like oil filters, you always use proper trusted brands anyway, not whatever the OEM has taken to using.
    • MBS206
      R34 Skyline climate control unit transistor

      By MBS206 · Posted

      Ahhhh... If you were putting 12V to the led in there, that's likely made it very unhappy. Chances are how you put power, was 12V across an LED that's meant to only have about 20mA through it at peak, and a forward voltage of about 1.8 to 2.4 volts. That circuit is likely only a 3V3 circuit, and will have a resistor in series with the led too. That's my guesstimate on that light, without having touched one.
    • Murray_Calavera
      Tein Circuit Master- rebuild worth it?

      By Murray_Calavera · Posted

      Another vote for installing them and see how you go.  I mean, you already own them, why would you not fit them? 
    • Duncan
      NC MX5

      By Duncan · Posted

      I have had too many of those over the years, my cars have a toolkit or at minimum a cheapy multi tool thing because its too easy to be snookered by some stupid plastic clip that stops you checking the battery terminal isn't loose.
    • Duncan
      WGNC34 - floor mats

      By Duncan · Posted

      Basically, if there is a part# on the nissan catalogue, it is a genuine part. There is a thing called "new old stock" which is stuff made years ago but never sold (or landfilled), but it is super hit and miss what you can buy. Other than some expensive Nismo stuff there is nothing new being made that suits these cars. The only time to be a little careful is (mostly in the US I think, but maybe Japan too), Nissan started rebranding some cheap crap maintenance parts like oil filters as "Pitworks"; stay away from them, if you are buying cheap just buy whatever the local car parts shop carries The three part numbers have an explanation on Amayama: 0V005 is auto, base style 0V015 is manual 0V505 is auto, hectic momo branded ones, maximum F&F points there!
×
×
  • Create New...