Jump to content
SAU Community

Recommended Posts

So I decided I'd get one of these kits and just see, I figure $150 isn't *too* bad to waste if it completely sucks. I chose the "Real Carbon Fibre" option and it certainly does seem to be real carbon (that's a plus)

Some pieces are good and fit well, namely the main centre console parts & around power window switches. However, some are obviously not so good..*see gauge surround :huh: *

These are just the pics of it in its packaging as it arrived, will have a go putting the pieces (that are good) on tomorrow and post the pics of them on.

Just thought some other people might want to see what these are actually like if they ever considered buying one but couldn't find any info or decent pics.

post-26304-1168494676.jpg post-26304-1168494696.jpg

Im assuming this is a general double sided tape stick on sort of thing?

Looks good .. Gauges well guess you cant ask for much .. You can get stickers from Remote controlled hobbie shops to match the c.f if you want to..

I put on the pieces yesterday & here is the finished product..

I didn't use all of the pieces because as I said in the first post, some are complete crap - don't fit well etc.

The main console pieces fit well so I'm happy about that & also the window switch surrounds look decent too (I botched the passenger one up a bit though, didn't line it up properly)

post-26304-1168649772.jpg post-26304-1168649786.jpg post-26304-1168649800.jpg

DECIM8 - It is just double sided tape holding the pieces on - it seems to be doing a good job so far..

The link on ebay if anyone wants to have a look is:

http://cgi.ebay.com.au/NISSAN-SKYLINE-1998...1QQcmdZViewItem

Don't mean to be nasty, but I'm not a big fan. It looks really nasty. it looks like it's just stuck on and it is.

Nah, I know everyone will have different opinions..it's really only a temporary situation until either someone is making the pieces in real CF or until I have the spare money to get them modicoated. The other sh*t that Nissan coated it in was just getting scratched too easy & that looked even worse I think.

N15M0 - It took about..10 days since I payed til it arrived.

so terd r u a girl?

moving along.. I think the old removal and respray would be the go with the r34 consoles.. looks ok, if all the peices fitted it would look 10 times better.. pitty it doesnt.. maybe rip out the dremel!

  • 3 months later...
It's so_tred & I haven't met any guys called Samantha, have you? :domokun:

Maybe....

*hides*

:nyaanyaa:

Um yeah..... I must say though... They are some sweet as rear lights... Are they these by any chance?

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...p;rd=1&rd=1

looks like the normal afterburners to me..

anyways.. i got one of these dash kits as well... HAD rather( a mte bought them didntr like it and sold it to me for $20.. i wouldnt pay him more.. the cheap bastard that i am:P)...btw he paid $150 odd for it

and here;s how it turned out.. the pics look much better than it actually is..

post-36886-1176996222.jpgpost-36886-1176996248.jpg

post-36886-1176996284.jpg

ripped em out coz they completely sucked!!!! i mean.. stickers??? for the skyline??? eeeeks!

.. went to supercheap... thanx to another thread on this forum... bought all the materials for $30.. and here are the results..a champagne finish.. pics were taken inside teh garage at night.. so excusez.. to all 'yer ppl.. the stickers..the real thing.. quite a difference i;d say... its last me over a month now.. no scratches.. no effects of heat et al.. no offense samantha.. but i felt this was the real bet.

post-36886-1176996424.jpgpost-36886-1176996453.jpg

Edited by traman18

IM not a fan of the carbon fibre look.. it gives a nasty look to the dash, to in ya face. i do however like traman18 dash, thats nice.

sorry to hijack the thread, but does anyone else have problems with dust and crap sorta sticking to the middle console??? i use armour all, and it cleans most off, but it takes ages to clean, and in few days time, its back on.. any suggestions?

IM not a fan of the carbon fibre look.. it gives a nasty look to the dash, to in ya face. i do however like traman18 dash, thats nice.

sorry to hijack the thread, but does anyone else have problems with dust and crap sorta sticking to the middle console??? i use armour all, and it cleans most off, but it takes ages to clean, and in few days time, its back on.. any suggestions?

the dust problem is costed by armour all. it attract dust all the times.

switch to meguiars

DECIM8 - It is just double sided tape holding the pieces on - it seems to be doing a good job so far..

Isn't the whole point of adding carbon-fiber to the interior to add strength and save weight, using stick on stuff is just adding pointless weight. Hey, it might look cool but isn't this RICE??

Plus it looks like it's gonna start peeling any second, Pull it off before it leaves sticky shit all over the original surface...

Isn't the whole point of adding carbon-fiber to the interior to add strength and save weight, using stick on stuff is just adding pointless weight. Hey, it might look cool but isn't this RICE??

Plus it looks like it's gonna start peeling any second, Pull it off before it leaves sticky shit all over the original surface...

adding strength to the dash console ? is that needed? am not too sure.. but with you on the stickers. gross me out. And they shouldnt leave too much of a mark.. i had mine for 3 weeks or so and they came out cleanly when u apply even force throughout. Whatever of the glue is left can be removed either with acetone or sanding it out with 400grit

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...