Jump to content
SAU Community

Recommended Posts

U'r lucky this is SAU and I'm not an admin here :)

I meant that people have replaced seals and then the car has done a Turbo shortly after.

which seals are we talking bout here? gaskets or turbo bearing seals?

btw pulling the front and rear off turbos are easy n wont stuff anything up.. if u start pulling the cartridge apart thats when ull have troubles

Link to comment
https://www.sau.com.au/forums/topic/151313-my-gtr/page/2/#findComment-2816651
Share on other sites

Kushil - My Series II only had POD (enclosed, cold air feed and heat shielding foam) Turbo back exhaust and the factory dual stage boost bypassed so it would run 7psi all the time. At a guess, the car would've made 140-145rwkw's? It had Bilstien Shocks, King Springs, 265 rubber (rears 235 front) and a strut brace so it was fun to drive having come from an NA FWD Celica. The R makes my Series II feel like a stock NA silvia. The power and handling is not comparable. I friend of mine who drives a fairly modded 185awkw WRX explained that he didn't want to race me on the strip or track after going for a ride in it.

I was under the impression that moving into a GTR would just be a heavier, slightly better handling and more powerful Skyline but the difference between the two cars is much bigger than that. Drive one and you'll understand better, good luck on your purchase!

NB: To be fair, the R has more mods than my last car by the way.

Bugger.......ya...i got the same sort of mods in my GTST...no cold air shilelding though....and still on factory boost...probably a bit slower than you car.......

thankx for the info..

NB: To be fair, the R has more mods than my last car by the way. I am preety sure it has ???....

Link to comment
https://www.sau.com.au/forums/topic/151313-my-gtr/page/2/#findComment-2816676
Share on other sites

I have always seen the 33's as a 'not rare enough for me' type car, maybe its just GTST's. But when I see the GTR's up close and in Midnight Purple I start to like them more and more.

But counting all the 32GTR's in Australia now I'm not one to talk :O ..... :P

Link to comment
https://www.sau.com.au/forums/topic/151313-my-gtr/page/2/#findComment-2817281
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...