Jump to content
SAU Community

Recommended Posts

hey mate, i recently got a z tune vent moulded into my 32gtr bonnet i noticed around 15+ degree drop in engine temp.

peeeeee.jpg

and rain gets in. but i dont really notice it bieng dirty or anything. just made sure the seal around my cam covers and coils is in good form!

just adding to the thread after reading the rest of it.. i have been pulled over by police on a number of occasions and nothing ever mentioned about the bonnet, or headlight.. or anything for that matter.

oh and id like to say that is the best cai i have ever seen. love it.

  • Replies 68
  • Created
  • Last Reply

Top Posters In This Topic

It's to allow hot air out, that's why it is positioned above the turbos; that's also why i like the bonnet i posted.

Hot air rises :)

Ahhh, makes sense :laugh: How much of an effect on cooling would u think it has tho, i mean that vent is pretty small probably not even palm size. I have to admit it looks pretty nice tho, clean and subtle. Cops wont even give it a 2nd glance.

Has someone got some pics of a raised bonnet?

It doesnt look that bad, but its still noticeable. Just imagine ur normal bonnet raised maybe an inch at the part nearer to the windscreen. It sorta looks like some dodgy panel work has been done. Haha their everywhere around here in Malaysia, seems to be pretty common unlike in melb.

Something like this would be good I reckon.

http://www.j-spec.com.au/list/index.php?ID=9223

The one vented bonnet I do like is the do-luck one. It has those fins that arent too large and over the top but still looks like it would do a proper job cooling. Ive never actually seen one of those do-luck bonnets on a real car before tho :P

edit: actually I don't think they're naca ducts now I look at it, looks more like their designed to use the flow of air above the bonnet to pull hot air through it.

the vspec r34 bonnet duct is a NACA duct.

http://en.wikipedia.org/wiki/NACA_duct

  • 3 months later...

I'm looking at a naca duct.

I have not been able to find a good one yet..

The R34 GTR V-Spec 11 and Nur edition have one in the bonnet..

That is what I'm after.

No bling.. just function.

Porsche 924 have them, lotus, some farrari's.. gt40 even the old forb XA GT had them..

but I still have not found a good one!

Anybody got one?

Please PM me!

Cheers.

Aaron

You can buy a bonnet with a naca duct already installed in it from japan, like a one piece thing. I almost purchased one but then i figured its too much to pay for such a small vent? Im not even sure if it'll work well at reducing underbonnet temps. So in the end i got a shift sports bonnet, with the large centre drop vent behind the radiator which will most probably do its job at cooling. I also got a matching vent cover in case it rains/hails whatever heh :sorcerer:

Edited by Yawn

anyone know how rain would affect ur engine...ie rust easier/quicker?.....water falls into ur engine and blows ur cylinders?

say u get a z tune bonnet for u car and u park it outside everyday and it pours wat r u gonna do?

or say u goto work and u have to park outside for 8 hours and it rains for those whole 8 hours?

how will this affect ur car?

ON A TT SUPRA we did some testing at wakefield with streemers on the front bar and on the tip of the bonnet. and on the straight the ones on the grill and upper of the intercooler they were pointing forwards lol. the only thing pulling the air thru the radiator was the engine fan.

thisa was with a louverd bonnet. and a standard bonnet. and no bonnet. all made no differance to watertemp. the only thing that worked was having the intercooler cut in half so the radiatio gets its own air. and a curver partition seperating the rear of the cooler fronm the radiator area. with the cooler venting thru naca ducts on the bar.

also lifting the bonnet is a good trick. but the air doesnt go out of it. but back into the bay and pulls the air under the car.

im gonna try the same idea on my car at our next test day. cos ive got the same issue. at high speed it just gets hot. im no aero dynamacist but im learning

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Kinda glad I never got to this ..    https://www.facebook.com/groups/1483859159195077
    • @GTSBoy This method was able to get readings of -10 to -2, so it looks like its monitoring.  Now I need to figure out why the vacuum on the line provided isn't alternating with manifold pressure.  I went with 2 lines that an RB25 tuner recommended but I'll get a longer hose and try directly off the back of the manifold.  He may have been used to OEM intake setups while I have a DBW setup that removed the MAF and IACV.  
    • I work at a car detailing and tinting shop called Quark which gets all manner of German cars in usually (mainly due to a contract with Mercedes Benz Kita Osaka, BMW Nishinomiya and others) but every once in a while something special comes in, like a fully restored 1972 HS30 Nissan Fairlady 240ZG... The shop owner had immediately started applying film to the windows as soon as it was in the shop so the interior was completely covered in towels and plastic sheets. But I could get a few photos of the engine bay which was restored like new. Such an amazing car to see in pristine condition in Japan these days.  
    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
×
×
  • Create New...