Jump to content
SAU Community

Recommended Posts

just wondering if people here in adelaide have compared prices of thing's like turbo's,exhaust's air flow meter's etc lately.

I did some investigation today.

GTR air flow meter's adelaide $350 second hand $500 brand new

sydney brand new $350

clutch exedy twin plate adelaide $2,800

sydney $2,200

1994 r32gtr gear box adelaide $3,800

sydney $3,000

This is approx what I found out anyway speaking to peter from advan performance in silverwater Sydney.

Seem's to me alot of us over here are getting ripped off big time.

If other people have found this to be true please post here so we can compare common thing's that we might end up having to replace at any time.

thank's

Link to comment
https://www.sau.com.au/forums/topic/151329-price-difference/
Share on other sites

Did you ring all the wreckers in the stickied list?

Here in Adelaide you can pick up a 300zx airflow meter for low 300's bran new.

Prices vary considerably. I was after a stock air box quite some time ago. Adelaide Jap wanted $250, JMS wanted $40.

R33 rwd Gearbox's range from 1100 to 1700.

R32 rwd gearbox's range from 500 to 1000.

In the past I have seen an R32 GTR gearbox go for $700 to $1500 here in Adelaide. Depends who you call I suppose.

just wondering if people here in adelaide have compared prices of thing's like turbo's,exhaust's air flow meter's etc lately.

I did some investigation today.

GTR air flow meter's adelaide $350 second hand $500 brand new

sydney brand new $350

clutch exedy twin plate adelaide $2,800

sydney $2,200

1994 r32gtr gear box adelaide $3,800

sydney $3,000

This is approx what I found out anyway speaking to peter from advan performance in silverwater Sydney.

Seem's to me alot of us over here are getting ripped off big time.

If other people have found this to be true please post here so we can compare common thing's that we might end up having to replace at any time.

thank's

I live in Sydney now and have found better prices in Adelide and have been sorcing most parts from there for mates and ourselves. Advan is quite pricy and not many of the SAU user here go to them for parts they buy them straight from Japan thru Just Jap http://www.justjap.com.au/ and this place is really good http://www.slidingperformance.com/catalog/

But in the end its who you know and how much you buy from places to get the price down

Did you ring all the wreckers in the stickied list?

Here in Adelaide you can pick up a 300zx airflow meter for low 300's bran new.

Prices vary considerably. I was after a stock air box quite some time ago. Adelaide Jap wanted $250, JMS wanted $40.

R33 rwd Gearbox's range from 1100 to 1700.

R32 rwd gearbox's range from 500 to 1000.

In the past I have seen an R32 GTR gearbox go for $700 to $1500 here in Adelaide. Depends who you call I suppose.

$5000 for a R32 box? Hahaha typo methinks. :)

Did you ring all the wreckers in the stickied list?

Here in Adelaide you can pick up a 300zx airflow meter for low 300's bran new.

Prices vary considerably. I was after a stock air box quite some time ago. Adelaide Jap wanted $250, JMS wanted $40.

R33 rwd Gearbox's range from 1100 to 1700.

R32 rwd gearbox's range from 500 to 1000.

In the past I have seen an R32 GTR gearbox go for $700 to $1500 here in Adelaide. Depends who you call I suppose.

$5000 for a R32 box? Hahaha typo methinks. :(

heheheh What typo?

:)

Factor in Postage for items like gearboxes as well.

The weight of the items almost makes it not worth it to buy interstate, and u have to buy the item without seeing it as well.

Even if you can see it, it's pretty hard to tell the internal condition of a gbox, unless of course you could open it up but find me a wrecker that'll let you do that. Just have to hope they'll honour the very much limited warranty they offer.

At the end of the day it's a bit of a lottery what ever you do.

P.S. Cubes. Yeah, just must be my failing eye-sight. :)

Edited by Oosh
Even if you can see it, it's pretty hard to tell the internal condition of a gbox, unless of course you could open it up but find me a wrecker that'll let you do that. Just have to hope they'll honour the very much limited warranty they offer.

If u buy a gb from a wrecker without any warranty your asking for it anyway...

As far as the gear box goes, it is a brand new r33 1998 GTR box. My GTR is a 1994 R32 and has the R33 GTR box in it from the factory. It has the pull mechanism instead of the push one.

The input shaft bearing is going and will cost $2,600 to replace {so I been told} and I think this makes the new box sound more attractive, if you know what I mean.

Mind you if some one out there want's to throw me $20,000 of there money I will gladly throw in a R34 box :laugh:

Edited by savage GTR

a complete rebuild should only cost $460 in bearings (using genuine nissan ones) and $550 for a complete syncro set.

Complete labour to pull box out and rebuild and reinstall would b e $600

So ~$1600 (+- $200) for a rebuild. I think your quote is way off. GTR internals are similar to r33gtst...

Yep and now that I have a 12tonne hydraulic press, Time to pull that finger out your Bung Hole Darren. ;)

SavageGTR, Grab the bearing part numbers and have CBC match them up.

I'll make sure I keep you on my buddies list for if I need to change some bushes :). Is your currency cartons of beer or bottles of wine :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...