Jump to content
SAU Community

Qr Sprints - 27 Jan 2007

ZENNON

By ZENNON,
in Events

 Share

Recommended Posts

Dan_B Mentor

Dan_B

Posted
Posted

Was too hot yesterday to do any good times,i ended up with cooked rotors and a leaking heater hose which was the cause of my overheating problems.

Car felt like it was down on power the whole day but it was still going good, im happy with the new suspension and air intake system.

Also was good to meet up with you Zennon

ZENNON Grand Master

ZENNON

Posted
  • Author
Posted

yeah like wise dan

and i agree on the heat - was way too hot - i only managed 64's and yeah - car felt like crap - and boost gauge pipe came of in session two :)

dodgy bloody pipe... cos its like a big pipe that comes out of the engine and that is just pushed into a smaller one which goes to the gauge... will have to do something better there :(

Bobjones Mentor

Bobjones

Posted
Posted

I guys, I popped out breifly as we ended up not getting Cam's evo ready in time...long story.

I was in a white R33, but stayed down the tower end of the bays with a red Evo 6.5 as it was his first outting and needed some advice. I only stayed for a bit and missed his 130km/h turn 1 off...

It was not as hot as pre Christmas Time Attack day but still too hot for some cars. Hopefully Friday is a little cooler...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Starting again

      By Kinkstaah · Posted

      Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Duncan
      R32 GT-R: 4WD Light Turns On After Bumps – Code 19 (ETS Motor) But No Issues Found

      By Duncan · Posted

      Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...