Jump to content
SAU Community

Alarm Not Working With Turbo Timer

sky30

By sky30,
in Car Audio & Electrical

 Share

Recommended Posts

sky30 Mentor

sky30

Posted
Posted

I bought a R32 with an alarm already in the car, and have fitted my turbo timer from my old R32. Now when i turn the car ofat the key (still running with turbo timer on), get out and lock the arm the alarm/lock doors, the alarm wont arm as the car is still running via the turbo timer. Anyone know how to wire it so it all works sweet?

My old R32 had an alarm with the same timer im using now, but the guy who installed it had it working so it would arm the alarm even if the car was running via turbo timer, so it can be done, but im not sure how.

Anyone?

Link to comment
https://www.sau.com.au/forums/topic/152339-alarm-not-working-with-turbo-timer/
Share on other sites
Chris Rogers Grand Master

Chris Rogers

Posted
Posted

you need a relay.

use one output of the timer to run the relay and loop the IGN input of the alarm through it. whent eh timer comes in the relay turns on and cuts IGN power to the alarm- car will arm.

one trap here though. if the IMM points NEED IGN to stay closed then you are stuffed.

do you know what unit you have (alarm) actaully show me the remote.

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • EddieR34GT-X
      R34 Gtt Wheel Offset Advice

      By EddieR34GT-X · Posted

      I've replaced the front brakes of my NA to 324 brembos and 350z calipers: i'm going for 225/40-18 up front and 245/35-18 in the back. I have Rays 7.5*19 ET35(225/35) in the front with 5mm spacers otherwise the calipers "lock up/ won't rotate". When i use the calculator i come up with 8*18 ET30 for 225/40...... but not sure i get problems with the calipers. Anyone riding around with 18 inch. that can confirm "that it'll fit"? In the back it's 7.5*9 ET30 (245/30) with the 5mm spacers, but there is no problem with the standard small brakes, so i want to take 8.5*18 ET25 (245/35).
    • Shizu
      Returning after a long time!

      By Shizu · Posted

      Lol.. but then.. always come back to a JDM..
    • luke gtr
      What's this Foreign Object?

      By luke gtr · Posted

      Glad to hear. If possible, get your tuner to check air's to make sure everything is still where it should be.
    • Kinkstaah
      Hello fellow enthusiasts

      By Kinkstaah · Posted

      The problem with FB/Insta/Reddit etc comments relating to cars is simple. You get to ask a question once, and get one round of replies. For things that can actually be answered in a few lines of text, once, it's fine. After 6 hours, your original question is lost to the void. There are no follow ups, additional questions, anything. No project car is ever such a simple list of questions to ask. You need discussion.
    • luke gtr
      Hello fellow enthusiasts

      By luke gtr · Posted

      Welcome.  Here's what I have noticed about forum vs FB..... FB; seems to be wallet racing, and the same few questions asked over and over. There *may* be some groups that are closer knit, but most have changed for the worse. SAU; unfortunately, no longer in its glory days. But....genuine people with similar interests. Not all about how much you spent and saying you dont have enough power. Sooooooo much knowledge available. Have personally seen people post up about literally topics I made myself, asking on FB like no one has done it before. Most has been done, and most of that is here.   If you ever feel like just general chatting theres the wasteland.  Other interests are also generally covered in other areas of the forum. Hope you enjoy hanging around. We would love to have you.   P.s. nice 32 😀 
×
×
  • Create New...