Jump to content
SAU Community

-

rbs30

By rbs30,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

rbs30 Collaborator

rbs30

Posted
Posted (edited)

Wasnt really planning on selling but i thought i'd just see if there is much interest around in something like this.I could use the space and its almost impossible to sell a gtr these days so i'll see how this goes.

I have a 1972 240z (2seater) it has an rb30 block that has been re-built just with linished std rods acl race bearings etc,head is a rb25det with the vvt deleted,it was re-built with stock cams 3 angle valve grind,new guides,arp studs etc.

It has a greddy plenum with xf tb

550 cc injectors with custom top feed rail and SX regulator

300-600 custom cooler

Garret GT35R with a 1.06 exh housing

Tial external gate with screamer

Microtech lt12-s with x-6 sequential ignition with bosch coils and magnicor leads

Turbosmart e-boost2 (sleeper series)

Custom 3" exhaust

Big radiator

VG30dett 5 speed(same as rb25 with better ratios)

Custom tailshaft

R32 lsd with custom en26 axels and V8 commodore cvs

Custom rear disk conversion

Autometer gauges

044 pump with surge tank etc

Electric water pump and thermo fan

I did the usual 1000 km run in then took the car to the dyno and made 320 hp @ the wheels on 10psi

the tuner told me it easily has potential to make 500rwhp with more boost but to drive it for a while to get used to it first.Well i've decided that its needs some chassis strengthening before it gets anymore power

so it will need some thick walled tubing welded in to replace the flimsy stock chassis rails,also a cage would be a good idea.

This car weighs no more than 1000kg so it will be seriously quick when tuned more.

the body is in ok condition with some rust in the usual spots but nothing serious(rare spares sell replacment panels)

The paint is a mess,and i mean a mess..its flakey etc..would be a HOT car with a paint job and some wheels which i will be doing if i dont sell it(been enjoying it as a sleeper for the moment).

As i said im really just seeing how much interest is out there for this.

If there is interest,i will borrow a camera and take some pics and post them.

If i sell the GTR first it wont be for sale..I dont really need to sell either but i would like some room in my garage and some $ in my pocket.I'd rather sell the GTR but we'll see what happens.

Got 6 months rego GTR240 plates included

I'd consider offers around 12k

240z19pu.th.jpg

Edited by rbs30
Link to comment
https://www.sau.com.au/forums/topic/152677--/
Share on other sites
240stu Newbie

240stu

Posted
Posted

I'm interested...

Where are you located? Post up your contact details and I will call you.

In fact, email me as I don't often get onto these forums.

Email address:

stuarta AT aapt DOT net DOT au

Send photos through if you've got them.

Link to comment
https://www.sau.com.au/forums/topic/152677--/#findComment-2840198
Share on other sites
  • 3 weeks later...
RaceBorn Apprentice

RaceBorn

Posted
Posted (edited)

Hi, I am interested in this vehicle. Is there any chance you can email me some more pictures, and also your contact dtetails? If you have time, I'd love to come up and see the vehicle this weekend as well.

My email is [email protected]

Thanks, Amir

Edited by RaceBorn
Link to comment
https://www.sau.com.au/forums/topic/152677--/#findComment-2892674
Share on other sites
rbs30 Collaborator

rbs30

Posted
  • Author
Posted

Sorry guys.Passed an emissions test this week,got it all engineered and fully legal..Had a power tune done yesterday and made 517rwhp..Couldnt bear to sell it now..I'll just try a bit harder to sell the gtr.

Link to comment
https://www.sau.com.au/forums/topic/152677--/#findComment-2896007
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Latest Posts

    • Dose Pipe Sutututu
      What brakes on R34 GTT(Europe)

      By Dose Pipe Sutututu · Posted

      Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...