Jump to content
SAU Community

Group Buy Susp. Bits Installed - Now A (possibly) Dangerous Problem With It

superwheelbarrow
 Share

Recommended Posts

superwheelbarrow Apprentice

superwheelbarrow

Posted
Posted

G'day guru's,

Would really appreciate some help with this!

2 weeks ago I had my R33 GTST Bilstein and Whiteline GB parts installed (basically everything listed) at the recommended place listed on the Group Buy page for my area. Driving around it seemed fine, felt nice etc - until a couple of days ago.

I noticed weird sounds coming from around the front left wheel area while driving. It sounded like a slight grinding noise, and also some squeaks and 'bangs'. I thought it might be because we have had some really hot days all in a row lately - might be the bushes squeaking or something.

Today I decided to see if I could see anything weird in the front left suspension area, and this is what I saw:

hailsuspension012fg7.th.jpg

Is this dangerous?

Should this have happened with just normal driving on the streets after 2 weeks?

What could have caused this?

Is this going to throw out my settings?

Sorry for the wall of questions :cheers:

I can post up the suspension tuning settings if that is any help too.

Much appreciated guys!

Thanks,

Adam

dangerman4 Mentor

dangerman4

Posted
Posted
G'day guru's,

Would really appreciate some help with this!

2 weeks ago I had my R33 GTST Bilstein and Whiteline GB parts installed (basically everything listed) at the recommended place listed on the Group Buy page for my area. Driving around it seemed fine, felt nice etc - until a couple of days ago.

I noticed weird sounds coming from around the front left wheel area while driving. It sounded like a slight grinding noise, and also some squeaks and 'bangs'. I thought it might be because we have had some really hot days all in a row lately - might be the bushes squeaking or something.

Today I decided to see if I could see anything weird in the front left suspension area, and this is what I saw:

hailsuspension012fg7.th.jpg

Is this dangerous?

Should this have happened with just normal driving on the streets after 2 weeks?

What could have caused this?

Is this going to throw out my settings?

Sorry for the wall of questions :cheers:

I can post up the suspension tuning settings if that is any help too.

Much appreciated guys!

Thanks,

Adam

who installed it for you?

either didnt do the nut up or didnt put the nut on at all.

bolt comes out, you crash and burn...aarrrgggghhhhh...

take this pic to whoever installed the suspension and cut sick at them..

zed-031 Rookie

zed-031

Posted
Posted (edited)

Not happy Jan, reminds me when I had some work done on my car. 1 week later felt like I had a flat tyre, turns out they stripped the studs on my left rear. Damn wheel nearly fell off at 80kph. As the other guy said, take it back and show them. I'd hit them for a free wheel alignment to.

Edited by zed-031
jrocket Proficient

jrocket

Posted
Posted

Lucky man. Could have ended up badly. I remember when i had some knocking in my car from the wheel area. We jacked up the car and turned out that who ever last took the wheel off didn't do it up tight and i could just undo all the wheel nuts by finger. The whole thing was just slapping around. Fagged the rim too by being loose. I like to alway check the work done to my car after someone has been playing with it.

Trust33 Grand Master

Trust33

Posted
Posted
DON'T drive it, call the worhshop & let them know, i they're half decent the'll pay for the tow to them to fix it.

What he said.Dont drive a death trap.

I have installed those bushes myself once b4.If the retaining nut,that locks the bolt in place,is tight,then that shouldnt have happened.My guess is that they put the bolt in there but diddnt tighten the retaining nut,with lock washer,up enuf therefore it has just worked it's way loose.

Or maybee they forgot to put the lock washer on at all.Who knows.

Death trap.

Very,very dangerous stuff.

:P:D:D thats just not right.

P.S: Send them the pic as proof of bodgey!

Sydneykid Grand Master

Sydneykid

Posted
Posted

As the guys have said, don't drive it. If they are not there today, then get them on the phone first thing Monday and explain the situation. PM me if you need any further help.

The usual process is to install the bushes but not tighten the nuts fully until after the wheel alignment. My guess (and it's only a guess) is that they have not done the final tighten after the wheel alignment.

:P Cheers :D

superwheelbarrow Apprentice

superwheelbarrow

Posted
  • Author
Posted

Thanks for the help guys :)

Took it back to the place that installed it and got it fixed up. Is it a possibility that there could be permanent damage? Looks like there was a critical lack of attention to detail...

Just glad I didn't crash and burn :P

  • 2 months later...
superwheelbarrow Apprentice

superwheelbarrow

Posted
  • Author
Posted
Out of interest can you name the company? we all know mistakes are made but it would be good to know

If this is somehow breaking forum rules please delete, but the place that installed it this amazing way was the recommended installer for Canberra listed in the group buy thread.

PM if you want me to name names...

BRUNSKIGTST Proficient

BRUNSKIGTST

Posted
Posted

im sure to look for that problem now to see if anything is wrong i also herd u have to look out for mechanics who rip ur after market stuff from ur car if u dont know the guy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      Prime parking, she is a little girl...LOL
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I'm actually not sure - I think it was "Stealth Performance" (It really is near impossible to find a FEMALE 1/8BSPT to 1/8NPT male at ALL) but having the thing leveraged on a 90 degree angle on a small aluminium fitting is not too smart. Also in not too smart, I've drilled out the center of the broken fitting so there's maybe 0.00001mm of thread to bite into, so yeah. I may have to get it drilled/tapped/plugged entirely. Given I could conceivably tap a thread/adapter/pressure line in any point in the oil system I suppose it's feasible to run a line to the Nissan Sensor to keep the dash working. Do these exist in AN fittings and the like? Like an AN fitting that has a NPT (or other?) thread as well for putting a sensor in?
    • sonicii
      Anyone running the VQ37VHR with forced induction?

      By sonicii · Posted

      I would agree.  There will be an amount of boost you could run safely with an otherwise factory system, but it would be low enough to not be worth the cost.  And if you are reliving your 20s, you know a 'little bit' was never enough. Personally, if I didn't want to spend the money, then stick with NA bolt-ons, and maybe a tune.
    • Dose Pipe Sutututu
      Mistakes were made, my R34 Story

      By Dose Pipe Sutututu · Posted

      Fuark, at least the motor survived. What brand was the fitting that snapped?
    • GTSBoy
      Anyone running the VQ37VHR with forced induction?

      By GTSBoy · Posted

      Wrong question. There's no point in spending the rather large sum of cash and effort to add turbo, without taking it to the "sensible" limit of the motor itself. If you have to upgrade injectors, etc, then so be it. That is a tiny fraction of what it will cost you to turbo it.
×
×
  • Create New...