Jump to content
SAU Community

Kkr 430 Hp Turbo Setup For Sale!

NE-33-XT
 Share

Recommended Posts

NE-33-XT Apprentice

NE-33-XT

Posted
Posted

hey guys.. its me again. Surely there is someone out there with an RB25DET engine keen to make at least 250kw at the wheels. I am sellin a KKR 430hp turbo with a T3 flange and dump pipe and all gaskets required. Along with that is a brand new set of 555cc nismo injectors and a bosch Z32 air flow meter with the adaptor plug to suit. Im only askin for $2200 fot the lot. Its less than what i paid for it. I have all the reciepts with me. If you are keen let me know.. ill even deliver it if I have to.. I am located in Sydney, NSW.

My name is matt and mobile no. 0438 568 907 ... You can call me on this if you have any questions... cheers!

Link to comment
https://www.sau.com.au/forums/topic/153620-kkr-430-hp-turbo-setup-for-sale/
Share on other sites
SKYHY Collaborator

SKYHY

Posted
Posted

hey dude ill give you $2050 plus what ever postage will cost you to Metro Melbourne post code is 3061

hey guys.. its me again. Surely there is someone out there with an RB25DET engine keen to make at least 250kw at the wheels. I am sellin a KKR 430hp turbo with a T3 flange and dump pipe and all gaskets required. Along with that is a brand new set of 555cc nismo injectors and a bosch Z32 air flow meter with the adaptor plug to suit. Im only askin for $2200 fot the lot. Its less than what i paid for it. I have all the reciepts with me. If you are keen let me know.. ill even deliver it if I have to.. I am located in Sydney, NSW.

My name is matt and mobile no. 0438 568 907 ... You can call me on this if you have any questions... cheers!

Sexual_32 Proficient

Sexual_32

Posted
Posted
hey guys.. its me again. Surely there is someone out there with an RB25DET engine keen to make at least 250kw at the wheels. I am sellin a KKR 430hp turbo with a T3 flange and dump pipe and all gaskets required. Along with that is a brand new set of 555cc nismo injectors and a bosch Z32 air flow meter with the adaptor plug to suit. Im only askin for $2200 fot the lot. Its less than what i paid for it. I have all the reciepts with me. If you are keen let me know.. ill even deliver it if I have to.. I am located in Sydney, NSW.

My name is matt and mobile no. 0438 568 907 ... You can call me on this if you have any questions... cheers!

u knew i had the cash a week ago bro.. U said u would contact me back if old mate didnt buy it..

U didnt contact, so i went n bought a brand new 1.. LOL..

ohh well, good luck with the sale, These turbos r really awesome value for money guys.

NE-33-XT Apprentice

NE-33-XT

Posted
  • Author
Posted

Yeah sounds good mate. If you are keen give me call on that number and we will organise shipping asap.. Let me know straight away as there are others that are keen. The number is 0438 568 907

SKYHY Collaborator

SKYHY

Posted
Posted

how many k's has the turbo done and what rpm does it get full boost and how much boost have you ran on it?

Yeah sounds good mate. If you are keen give me call on that number and we will organise shipping asap.. Let me know straight away as there are others that are keen. The number is 0438 568 907

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • EndZee
      R33 Gts/-t Abs Module Wiring Schematic (not Gt-r)

      By EndZee · Posted

      Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...