Jump to content
SAU Community

Recommended Posts

Hey,

was interested in getting into off street dragging. was interested to kno who in adelaide does it?

I just need a little advice to get started.

Whats the best way to get into it? When, where etc does it take place?

And are there saftey things that need to be done to the car?

Any help would be great.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/153785-dragging-in-adelaide/
Share on other sites

Yeah its been TOO long since AIR has last been functional for street drags.

Basically the car had to be in good working order and you had to have an approved helmet. All you needed was fuel and some fun!

AIR was crap because it was sooooooo slippery because it was never prepped unless it was for competitions.

and theres no bullshit

u got timeslips to prove if someones pulling their dick

this is crap! so where getting labeled as hoons and us young people are being stupid on roads yet for some of us that want to do it legally south Australia doesnt offer a place for us to do it!

this is crap! so where getting labeled as hoons and us young people are being stupid on roads yet for some of us that want to do it legally south Australia doesnt offer a place for us to do it!

Well no not at the moment........... and it's not the governments fault, it's that dickhead Bob Jane that NEVER upgraded the track, and then took Bill to court over it, which then took months! So after the court case which i believe has now ended with Bill winning, he is going to rebuild the whole place! so be patient and we will have a prime motorsports park close to town in the coming future!

Well no not at the moment........... and it's not the governments fault, it's that dickhead Bob Jane that NEVER upgraded the track, and then took Bill to court over it, which then took months! So after the court case which i believe has now ended with Bill winning, he is going to rebuild the whole place! so be patient and we will have a prime motorsports park close to town in the coming future!

yer fair enough, jus having a spit! what place he rebuilding?

If what darren is right.

Then Bill will be rebuilding the whole A.I.R raceway.

WHich is much needed as its very old now. I have not been there ever but have heard about it being very run down.

I hope it gets fixed up ASAP as yes we do need somewhere to go to have fun in the controlled environment.

I have heard rumours of the track(drag strip) bieng rotated so it's not into the sun........and also a jet boat sprint track in the middle of the circuit!

sounds good but the only problem now is, ill be dead by the time i see that happen!!!

You gotta remember though it would cost millions of dollars for someone to do a redevelopment like that.

And they gotta make money. So they need more than SAU going out every friday night to do that.

I'm sure it would do ok though as SA has a huge car scene. But they would need to attract actual drag events. With interstate and better yet international competitors.

But they would need to attract actual drag events. With interstate and better yet international competitors.

They havent had trouble in the past. The only thing they need to worry about is pricks breaking into peoples cars in the car park. A big turn off for anyone in the past...

I have heard rumours of the track(drag strip) bieng rotated so it's not into the sun........and also a jet boat sprint track in the middle of the circuit!

The biggest problem I can see with that idea is creating an area for sufficient runoff at the end should anything go wrong - the strip would have to be moved down substantially, and it would cease to be a part of the racing circuit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...