Jump to content
SAU Community

Recommended Posts

Subject: New credit card scam

This one is pretty slick since they provide YOU with all the information, except the one piece they want.

WARNING...New Credit Card Scam.

Note, the callers do not ask for your card number; they already have it. This information is worth reading. By understanding how the VISA & MasterCard Telephone Credit Card Scam works, you'll be better prepared to protect yourself.

One of our employees was called on Wednesday from "VISA", and I was called on Thursday from "MasterCard".

The scam works like this: Person calling says, "This is (name), and I'm calling from the Security and Fraud Department at VISA. My Badge number is 12460 your card has been flagged for an unusual purchase pattern, andI'm calling to verify. This would be on your VISA card, which was issued by (name of bank). Did you purchase an Anti-Telemarketing Device

for $497.99 from a Marketing company based in Sydney?"

When you say "No", the caller continues with, "Then we will be issuing a credit to your account. This is a company we have been watching and the charges range from $297 to $497, just under the $500 purchase pattern that flags most cards. Before your next statement, the credit will be sent to (gives you your address), is that correct?"

You say "yes". The caller continues - "I will be starting a Fraud investigation. If you have any questions, you should call the 1- 800 number listed on the back of your card (1-800-VISA) and ask for Security.

You will need to refer to this Control Number. The caller then gives you a 6-digit number. "Do you need me to read it again?"

Here's the IMPORTANT part on how the scam works. The caller then says, "I need to verify you are in possession of your card". He'll ask you to "turn your card over and look for some numbers". There are 7 numbers; the first 4 are part of your card number; the next 3 are the security numbers that verify you are the possessor of the card. These are the numbers you sometimes use to make Internet purchases to prove you have the card. The caller will ask you to read the 3 numbers to him

After you tell the caller the 3 numbers, he'll say, "That is correct, I just needed to verify that the card has not been lost or stolen, and that you still have your card. Do you have any other questions?"

After you say No, the caller then thanks you and states, "Don't; hesitate to call back if you do", and hangs up.

You actually say very little, and they never ask for or tell you the Card number but after we were called on Wednesday, we called back within 20 minutes to ask a question. Are we glad we did! The REAL VISA Security Department told us it was a scam and in the last 15 minutes a new purchase of $497.99 was charged to our card.

I checked this out on snopes.com.

Long story made short - we made a real fraud report and closed the VISA account. VISA is reissuing us a new number.

What the scammers want is the 3-digit PIN number on the back of the card. Don't give it to them. Instead, tell them you'll call VISA or Master card directly for verification of their conversation.

The real VISA told us that they would never ask for anything on the card, as they already know the information since they issued the card! If you give the scammers your 3 Digit PIN Number, you think you're receiving a credit. However, by the time you get your statement you'll see charges for purchases you didn't make, and by then it's almost too late and/or more difficult to actually file a fraud report.

What makes this more remarkable is that on Thursday, I got a call from a "Jason Richardson of MasterCard" with a word-for-word repeat of the VISA scam. This time I didn't let him finish. I hung up! We filed a police report, as instructed by VISA. The police said they are taking several of these reports daily! They also urged us to tell everybody we know that this scam is happening.

Please pass this on to all your family and friends. By informing each other, we protect each other.

Link to comment
https://www.sau.com.au/forums/topic/153828-scams/
Share on other sites

If they really want your credit card number it's not that hard to get.

Hell I have access to 300+ CC numbers at work, including those magic 3 digits, if you pay me enough you can go on a massive shopping spree.

(JOKE OF THE MOST MASSIVE PROPORTIONS)

Link to comment
https://www.sau.com.au/forums/topic/153828-scams/#findComment-2862377
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
×
×
  • Create New...