Jump to content
SAU Community

Recommended Posts

HICAS light can be effected by different: steering wheel, suspension, wheels, etc... so its probably going to be on.

I'd be more worried about compresson being even.

Some people have their turbos last for ages without problems. Some people smoke for years without problems.

Alot of people however, DO have issues with GTR's. Such as cooling and turbo problems. I had both and it was a big issue, had to sell it.

Its not just as simple as looking at the plenum to see how much paint is on there as some people say... lol.

I'd just reckon you need to be prepared to spend alot if you buy a GTR under 20k. Who knows, it might last years without a cent spent...but you'd be foolish to not be prepared for alot of drama's.

Difference with a GTR is... engines are worth a furtune if you need to replace or rebuild and so are turbo's.

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

HICAS light can be effected by different: steering wheel, suspension, wheels, etc... so its probably going to be on.

I'd be more worried about compresson being even.

Some people have their turbos last for ages without problems. Some people smoke for years without problems.

Alot of people however, DO have issues with GTR's. Such as cooling and turbo problems. I had both and it was a big issue, had to sell it.

Its not just as simple as looking at the plenum to see how much paint is on there as some people say... lol.

I'd just reckon you need to be prepared to spend alot if you buy a GTR under 20k. Who knows, it might last years without a cent spent...but you'd be foolish to not be prepared for alot of drama's.

Difference with a GTR is... engines are worth a furtune if you need to replace or rebuild and so are turbo's.

it's the 4wd light that's on!!

So you haven't bought this car yet, but you have ready access to it to see whats wrong with it?

GTR 4WD LIGHT THREAD

For $17k it can't look that good under the bonnet, like psybic says the paint on the plenum is probably all cracked and peeling :P. Ask the current owner if you can take it for a compression test, its $xxx money well spent on a car thats more than likely ready for a rebuild.

do you mean difference between the base model and vspec model or the diff between a 92 and 94 vspec ?

differences to base model are

faster atessa pro 4wd computer

brembos

17in bbs mesh rims

harder suspension

sticker on the back

many people think the vspecs 32 will be collectable as only 3000 were made . there were quite a lot more 33 vspecs

i dont know the difference between vpsec's in different years if there is any , i dont think there is . I have read that the rb26 in the 94s has some changes that appear in the 33 rb26 but their minor and that would apply to all 94s

so there arnt any engine canges as in fixing weak points etc? I am looking at buying a white 32 94 model gtr vspec with brembos etc.

So you haven't bought this car yet, but you have ready access to it to see whats wrong with it?

GTR 4WD LIGHT THREAD

For $17k it can't look that good under the bonnet, like psybic says the paint on the plenum is probably all cracked and peeling :P. Ask the current owner if you can take it for a compression test, its $xxx money well spent on a car thats more than likely ready for a rebuild.

To be honest the engine looks really really good no paint missing on the plenum it's got crome rocker covers and apparentlly hks cams. i'll post up some pics, but stupid me forgot to take pics of the engine. the car was only driving in rear wheel drive though.

So you haven't bought this car yet, but you have ready access to it to see whats wrong with it?

GTR 4WD LIGHT THREAD

For $17k it can't look that good under the bonnet, like psybic says the paint on the plenum is probably all cracked and peeling :P. Ask the current owner if you can take it for a compression test, its $xxx money well spent on a car thats more than likely ready for a rebuild.

To be honest the engine looks really really good no paint missing on the plenum it's got crome rocker covers and apparentlly hks cams. i'll post up some pics, but stupid me forgot to take pics of the engine. the car was only driving in rear wheel drive though.

by the way does any one know any places in lansvale sydney that does compression and leak down test's and how much do they usually cost??

sorry about the quality they were taken from my phone.

Cheers

anthony

post-18265-1170229675.jpg

post-18265-1170229768.jpg

post-18265-1170229807.jpg

post-18265-1170229867.jpg

post-18265-1170230019.jpg

looks quite tidy

get an inspection from a known skyline focused workshop which would include a compression test

(uas and croydon are just 2 in syd , plenty more)

if it gets good comp figures and theres no rust or accident damage then might be solid bargain

so there arnt any engine canges as in fixing weak points etc? I am looking at buying a white 32 94 model gtr vspec with brembos etc.

late model 32 changes , but none vspec specific if thats what you mean?

Edited by arkon
So really any gtr from 92 upwards is fairly good depending on condition.

I'd say more in the August 1993 and onwards :sleep:, thats when they started the Vspecs anyway.

Mine is an August 1993 model but not a Vspec, although it had an N1 ECU so maybe it was just a trial or end of a run model.

Car looks good mate

engine bay looks cleaned up for sale, whats with the FPR and why was it changed.how come the cam cover is not polished, but over all a leak down test would make me sleep better at night if i was buying it..

The fuel pressure reg is in the car cause the car still has standard injectors

and the cam cover is cromed as well.

Cheers

anthony

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...