Jump to content
SAU Community

Easter Saturday April 7th, Autosports At Eastern Creek


Recommended Posts

guys and girls...

As we have confirmed that our bank are not able to refund the monies paid into the AUTOsports account, i will need you to please email me your account details so we can refund your payments.

Can you please email your details to [email protected] and we will get them fixed up as soon as we can.

If you want to contact me, you can call me direct on 0408255005

IMPORTANT NEWS!!!!

Due to some unfortunate news from Eastern Creek. Autosports Eastern Creek day has been cancelled.

Autosports and everyone organising this event are very upset by this news but unfortunately this is something that we could not help as Eastern Creek is updating some electrial work onsite on that particular day.

We will be refunding everyone's money that has been paid please do not deposit anymore money for this day.

Regards,

Corinne

After the success of Australia Day at Wakefield Park...

The Autosports Crew are pumped to bring you our next event

SAT APRIL 7TH AT "EASTERN CREEK"

EVERYONE IS WELCOME, REGARDLESS OF WHAT FORUM OR MARQUEE YOU ARE FROM... EVEN IF YOU HAVE NEVER BEEN ON A TRACK DAY BEFORE, COME ALONG I CAN GUARANTEE THAT YOU WILL HAVE THE MOST FUN YOU CAN HAVE WITH YOUR PANTS ON

Autosports Eastern Creek

arial_dropshadow_450.jpg

Everyone has been asking for a weekend track day at the creek and we now have confirmed April 7th as the day.

Things are a little different than at Wakefield..

. but in saying that we will still be offering the same relaxed style event with the emphasis on driver education and fun.

A quick overview...

• Maximum of 60 cars

• x4 Groups of 15 cars

• 15 minute sessions

• $230.00 per person, must be paid for upfront

• No "official" timing

• Driver briefing at 8.15am.. if you are late you don’t go out

• First group on the track at 9.00am

• All new drivers will be taken on a site in lap with qualified instructor

• There is no drifting allowed on the track, drivers caught will be removed

• We will be stopping for a half hour lunch; directions to available facilities will be made available on the day. Unfortunately ARDC do not allow us to provide you guys with a BBQ and i sure as hell don’t expect people to eat from the caravan in the pits there.

More details will become available in the next week or so, now we need to get the numbers 100% confirmed as soon as possible. Given the arrangement with ARDC who run Eastern Creek, we must have EVERYONE paid for upfront.

Your position is confirmed when your payment is received...

Account Name AUTOSPORTS

Bank ANZ Liverpool

BSB 012-325

ACC 497136965

**IMPORTANT INFORMATION** Your reference number is your Autosports Username Please remember to use this reference as this is very important!

1. Ryan - JUSTJDM

2. Bron - JUSTJDM

3. Jas - ZX2NV

4.

5. Matt - Mattblack

6. Darren - via Mattblack

7. Michael - Gump

8. Andy - XSF1OW

9. Mehmet - BlinkyBill

10. Jake - Elmo

11. Steve - Homer

12. 747.GTR

13. Lisa - IMPREZZED

14. Jon - Primordial

15. Mike - Mike1987

16. Timbo - via Padey

17. Chris aka Chubbs - Evil_Weevil

18. Anna - Msnismo

19. Jason - Souther Motor Works

20. Andy - CA18-1200Coupe

21. Reserved for Tino

22. Reserved for Tino

23. Reserved for Tino

24. Reserved for Tino

25. Reserved for Tino

26. Reserved for Tino

27. Reserved for Tino

28. Reserved for Tino

29. Reserved for Tino

30. Reserved for Tino

31. Reserved for Tino

32. Reserved for Tino

33. Reserved for Tino

34. Reserved for Tino

35. Reserved for Tino

36. Greg - wombata

37. Rob - Audi RS4

38. EVO CAM

39. Jason - JET32R

40.

41. Steve - Plumba

42. Andrew - Andrw Le Lievre

43. Paul - Masterchief

44. Sam - via SteveG

45. Rob - via SteveG

46. Mike - via SteveG

47. Mario - R33

48. Mick - Evomick

49. Gerry - R34GTT taking the position of Padey

50. Terry - STiHigh

51. Josh - RedfastJosh

52. Todd

53. Gav

54. Andrew - "via Gav"

55. Pete - EvoOz

56. Greg - GT40 via Andy

57. Graeme -GT40 via Andy

58. Anthony - EVOtrIX

59. James - CAT

60.

  • Replies 80
  • Created
  • Last Reply

Top Posters In This Topic

Yep msnismo will be fine.. I will advise them who you are :wub:

:wave:

I registered on the forum and posted there too .... all paid anyways... now to get some other rims for the semis!

hang on...yeah 7th or 8th ???

if its a sunday Im out..

so I have to sign upto the other site too?

SATURDAY 7th.. no you dont have to.. just let me know and i will have them updated as well :wave:




  • Similar Content

  • Latest Posts

    • Please use a modern ECU. PowerFC with the Nintendo Gameboy controller is horrible. It's not 2005 anymore.
    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
×
×
  • Create New...