Jump to content
SAU Community

Recommended Posts

hey guys, some parts i have for sale >_< most of which are taking space in my garage :)

Cusco oil catch can, bought this from japan but now dont need it, brand new still in the box (unopened) Universal so can fit most turbo and na cars

Lookin for $120 firm

http://i169.photobucket.com/albums/u210/dr.../cuscocatch.jpg

genuine greddy dual pillar gauge pod for r34 GTT. Brand new still with the box (opened it to have a look, however havent used it as ive decided i have enough gauges already) Bought it from crystal autosport factory while i was in japan. Payed 10,200 yen for it. $100 firm

http://i169.photobucket.com/albums/u210/dr...trustpillar.jpg

http://i169.photobucket.com/albums/u210/drashou/greddy2.jpg

r33 dash lying at home had it on my r33 a while ago which ive now sold. Gone over it with carbon fibre film, looks pretty cool. Also comes with auto transmission surrounding in carbon fibre aswell. Has all the buttons intact etc $50

http://i169.photobucket.com/albums/u210/drashou/dash2.jpg

http://i169.photobucket.com/albums/u210/drashou/r33dash.jpg

Blitz bov $60

http://i169.photobucket.com/albums/u210/drashou/blitzbov.jpg

Dual pillar pod with two gauges one a blitz boost gauge and the other an apexi power gauge, was on a s13 however im sure minor adjustments will allow the pillar to fit on a skyline.. $100 firm in good knick

http://i169.photobucket.com/albums/u210/dr...alpillapexi.jpg

Dual pillar with two gauges greddy oil and greddy ext temp was fitted previously to a r32 skyline. $120 firm

http://i169.photobucket.com/albums/u210/dr...dhandgreddy.jpg

Also not sure how interested people may be.. but i may be willing to sell my original japanese number plate. hehehe.. Got it as a present from a friend in japan but i know there pretty popular here, was gonna hang it in my room but mehh.. i may wanan sell it :D

http://i169.photobucket.com/albums/u210/dr...numberplate.jpg

Im pretty busy atm and everything here is fairly bulky so i wont consider posting anything of. Pickup only or i may consider meeting you somewhere ( not as far as the city or anything.. just to a location that helps prevent you from gettin to lost around my area if your not from around northern suburbs)

Located in mill park melbourne

cheers guys

daniel

Link to comment
https://www.sau.com.au/forums/topic/155152-skyline-parts-for-sale/
Share on other sites

hey guys, theres about 5 of yous who are interested in taking the gauges of my hands. If any of yous are keen on making a better offer then what there advertised for then there yours. Im now willing to post items at your expense.

hey guys, theres about 5 of yous who are interested in taking the gauges of my hands. If any of yous are keen on making a better offer then what there advertised for then there yours. Im now willing to post items at your expense.

That sucks.....its always first in best dressed. A price is a price.

Yea hey i didn't know this was ebay... maybe a $1 NO RESERVE should be done with these...

I bid $1.50 >_<

when 5 people email you at literally the same time, each saying they want first dibs. What do you suggest. If your not interested then go post your unwanted opinions in anotehr thread thanks.

when 5 people email you at literally the same time, each saying they want first dibs. What do you suggest. If your not interested then go post your unwanted opinions in anotehr thread thanks.

Um right... I was only backing up what tridentt150v said, fair is fair after all... you cant ask for more than what you put... a price is a price... and i'm more than 100% sure that not everyone emailed you at the exact same time... but hey if they wana pay more then thats their choice...

I was actually interested in the R33 dash and S13 guage holder and guages... but if its like this then its all good...

Good luk wit sale dude >_<

Um right... I was only backing up what tridentt150v said, fair is fair after all... you cant ask for more than what you put... a price is a price... and i'm more than 100% sure that not everyone emailed you at the exact same time... but hey if they wana pay more then thats their choice...

I was actually interested in the R33 dash and S13 guage holder and guages... but if its like this then its all good...

Good luk wit sale dude >_<

your entilted to your opinion and its always first in best dressed, but within 5 mintues of posting the thread 5 people literally emailed me all saying they want it. Its not that easy to pick one at random.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...