Jump to content
SAU Community

Recommended Posts

Hey all,

Going off another request from a fellow SAU R34GTT Member, I've helped to source a supplier who is willing to do us a deal on R34GTR Rear Spoilers. Unlike my other group buys on Fibreglass / Carbon items, the supplier is local (SRS Auto)

Anyways; here's the product description:

R34GTR OEM Rear Spoiler (copy)

* 4 piece construction (2 stands, 2 wings)

* Bottom wing and stands made from FG

* Top Wing Blade made from CF

* Top Wing Blade Adjustable

Pricing:

Each unit retails for $495.00 (incl. GST) + Freight (pickup from Sydney is fine)

If we get 5 orders; I've been advised that a 10% discount will follow so you're looking at $465.00 each

Delivery:

I have no idea how i'm going to go about sending spoilers around the country if this happens to go ahead but I will reserve this bit to a PER APPLICATION basis. Things like packaging, insurance and all that will most definitely be a requirement I would say.

Photos:

None as of yet, but I have requested them in high-definition. Will post as soon as they are available.

Lead Time:

I've been told that they will have a 5 week lead time on these so if you're keen; it will be payment followed by 5 weeks before the the wing hits Sydney (from wherever the hell they get made).

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

All depends on whether the GTR wing bolts straight onto the GTT wing... I've been told that this is an exact copy of the GTR wing even down to the bolt measurements.

Hmm, I'm thinking of a flat-bootlid for my R33, and putting this wing on the back. I have seen it done with a GTT wing but I admit it looked a little small.

Then I can get the R34 GT-R front end conversion from Japan.. ooh yeah, then I'll pick up a cheap R32 RB26...

How much are R34 GT-R's lately, Might be cheaper :)

What do you guys think it will look like on an R32? Or would a twin blade aluminium one look better. I'm hopeless with these things :)

  • 2 weeks later...
  • 2 weeks later...

has anyone ever come across a photo of this GTR wing on the back of a 4 door R34? (can they post it up if they have)

I have a carbon R34 rear wing. Top blade is carbon, so are the end caps, as are the 2 support uprights.

6 pieces in total

I think the support uprights are longer and can not see any join in the carbon mat.

excellent quality....made in Japan and imported by me....but cost me more than twice the price of this group buy.

If anyone in Brisbane is interested in having a looking...PM me.

I have a carbon R34 rear wing. Top blade is carbon, so are the end caps, as are the 2 support uprights.

6 pieces in total

I think the support uprights are longer and can not see any join in the carbon mat.

excellent quality....made in Japan and imported by me....but cost me more than twice the price of this group buy.

If anyone in Brisbane is interested in having a looking...PM me.

Can you post up some photos?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...