Jump to content
SAU Community

Recommended Posts

Hey Guys, the time has come to sell my much loved GTR. Now have a young family and i just can't give the car the time she deserves or the money i want to spend on her.

Specs Are---

R32 GTR 1992

Complied 2001

66,xxx k's

Factory Midnight Blue Pearl Paint

HKS GT-RS Turbos

HKS Stainless Dump Pipes

HKS Front Pipes

3 1/2 Inch Exhaust and Hi Flow Cat

HKS Step 1 Cams

Adjustable Cam Gears

Head Reco'd and Ports given a clean up

M's Pod filters

HKS 550cc Injectors

Adjustable Fuel Regulator

600hp In Tank Fuel Pump

Apexi Power FC & Controller

120mm Mick's Metalcraft Intercooler

Jim Berry Custom Cluch & Pressure Plate

Lightened Flywheel

Lowered King Springs

Rays 3 Peice Racing Rims 17x9's

275 Federal Tyres (Near New)

RWD Switch

Turbosmart Bleed Valve

Car has run 10.97 @ 127.4 MPH (May 06)

Has only been run once at WISD (5 runs only)

502.2 hp @ the wheels running 1.2bar

Standard rear wing & bonnet included

Have owned it for 5 years. Car had 48,000k's when purchased, was completly stock when i got it except for a catback exhaust (which has since been changed) Have most receipts, Very, Very good condition inside, outside and mechanically. Car is Gun Barrel Straight. Searched 5 states and 4 months to find this car originally, if your after the RIGHT car, save yourself the legwork...

Sorry NO BLING HERE!!!!!lol

$25,000

Please PM me to arrange a look at the car or for more details.

post-18968-1171020155.jpgpost-18968-1171020190.jpgpost-18968-1171020271.jpg

post-18968-1171020297.jpgpost-18968-1171020322.jpgpost-18968-1171020348.jpg

post-18968-1171020374.jpgpost-18968-1171020389.jpgpost-18968-1171020417.jpg

post-18968-1171020436.jpg post-18968-1171020451.jpg

Edited by SCOOP
Link to comment
https://www.sau.com.au/forums/topic/155651-10-sec-r32-gtr/
Share on other sites

Guys, i have had heaps to do with this car, including helping to detail her up, and i car tell you it's so bloody clean and straight, you could eat food off the under carraige, let alone off the paint work (by the way Daz doesnt actually eat off the car LOL!!!!) I was also with the car at WISD when it ran it's 10.9 and with the right fuel, more boost and some more tuning this thing has heaps left in it.

That's M2C. I'm going to miss you SCOOP...... :(

Link to comment
https://www.sau.com.au/forums/topic/155651-10-sec-r32-gtr/#findComment-2895559
Share on other sites

Hi guys,

I'm a mechanic buy trade (and job) and i have driven the car just a week ago for a wedding and its very much alive ! Its a pleasure to drive like ALL GTR's should be.

With just a bleed valve as boost control and a street tune she has more to offer. This car offers the little things like perfect carpet and trims and no rattles etc, the right base for a built up as a even quicker car and also being able to be entered in a show and shine.

Its well worth the look if you want a clean slate !

I to well miss you SCOOP :)

Link to comment
https://www.sau.com.au/forums/topic/155651-10-sec-r32-gtr/#findComment-2909209
Share on other sites

Hi guys,

I'm a mechanic buy trade (and job) and i have driven the car just a week ago for a wedding and its very much alive ! Its a pleasure to drive like ALL GTR's should be.

With just a bleed valve as boost control and a street tune she has more to offer. This car offers the little things like perfect carpet and trims and no rattles etc, the right base for a built up as a even quicker car and also being able to be entered in a show and shine.

Its well worth the look if you want a clean slate !

I to well miss you SCOOP :huh:

Thanks Mincs, Id say she's gonna be around for a while yet. :P

Link to comment
https://www.sau.com.au/forums/topic/155651-10-sec-r32-gtr/#findComment-2917210
Share on other sites

  • 3 weeks later...
With all due respect how long do you think a stock bottom end will hold up to 600+ fly wheel HP ???

Who knows! Hours, years. Mate car has been like this for 2 and a half years, I try to drive it once a week to work but at the moment Ive driven it every day for the last month. Im not a hoon (anymore) but she gets a bit once a week, and at the moment every few days she might get a bit frisky.There isnt anywhere were you can stay into it anyway, just a short burst is all I need to get my fix :laugh: . But most times I can cruise to work and back and not rev over 4 grand. Besides if you dont think its gonna last then dont buy it. :D

Link to comment
https://www.sau.com.au/forums/topic/155651-10-sec-r32-gtr/#findComment-2979218
Share on other sites

  • 5 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 3 weeks later...

Im back guys, Any decent offers or swaps? I really dont want to go any further with her if I can help it, would need to get it fitted out to race if I want to keep going and its just getting to expensive. Would love MK1 Cortina to build and race but cant find one. Can anyone help? :) And thanks guys.

Link to comment
https://www.sau.com.au/forums/topic/155651-10-sec-r32-gtr/#findComment-3130079
Share on other sites

see if you like what i have to offer in the link below

I was actually reading the for sales on boostcruising, found yours and read it. then went back on here and you had messaged me, freaky. Sorry but realy want to sell or swap something fairly cheaper + cash adjust, thanks anyway and good luck with your sale. :blink:

Link to comment
https://www.sau.com.au/forums/topic/155651-10-sec-r32-gtr/#findComment-3133178
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...