Jump to content
SAU Community

Recommended Posts

Currently my car has un aftermarket alarm/immodiliser fitted with remote lock/unlocking.

For no apparent reason, now when i press the button, the siren beeps but the doors dont unlock? same goes for locking it. So i'm having to press the button to disarm the alarm, then use the key to unlock the car, which is annoying.

the central locking still works manually, when unlocking/locking with the key it operates both door locks & the passanger door lock still locks at about 25km/h

any idea whats wrong?

it did this to me about 12months ago, but after about a month it just started working again? Now its been more like 6 months so I need to look into fixing it.

any help very much appretiated thanks

Berin

Link to comment
https://www.sau.com.au/forums/topic/155884-remote-central-locking-not-working/
Share on other sites

Hey mate,

you most likely have an after market actuator in the drivers door to trigger the central locking from the alarm.

alarm ->actuator -> factory wiring -> passenger door

check out the wiring to the actuator or take the door trim off the drivers door and replace it.

Most likely it will cost you 10 bucks for the parts.

Unlikely it's a problem with wiring.

The alarm's actuators piggyback onto the originals, and are locked in place by a grub screw. Sometimes the screw comes loose, and the actuator simply slides along the factory rod.

Re-align the alarm actuator on the factory rod, tighten the grub screw, and Robert's your father's brother.

This happend to me...I have a Mongoose Immobiliser.

It only happend I after I degreased the engine and hit the engine bay with a pressure washer at Car lovers. After a week it started to work again.

Never had a problem since...and this was in December 06.

Have u done anything like this?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...