Jump to content
SAU Community

Recommended Posts

Hi all, Just cleaning out the shed, Can post the smaller items if required or Pickup, Lismore, NSW.

Nissan Skyline GTR Master Cylinder brace R32 $90

Sold the car so no longer needed. Used to brace the cylinder against the strut tower to improve brake feel/reduce flex. Sort of a race mod really but is anodised blue and looks cool too. (-:

Nissan Skyline GTR Master Cylinder R32 $90

Was Removed from a crashed GTR (NOT crashed due to brake failure) as a replacment for mine but it turned out to be a leaking ABS unit... so since the car is now also sold i no longer need this.

Nissan Skyline GTR coil packs R32 X5 $60 or $15 each (4 left)

Car was upgraded to splitfire coils, one pack got lost somewhere so there are only 5 left, maybe good for a 4 cylinder coil upgrade? (for sr20 etc?)

2X airpods without filter elements, generic/no brand, $10 for both

Sony Xplod Head unit and Stacker + Cadence Equaliser, with wireing, connections, cables, brackets etc. $280 the lot. Was working perfectly when removed from a car prior to sale, new car had decent audio so i have not used it again. (from memory the stacker alone cost over $500 new... ><)

post-21158-1171240502.jpgpost-21158-1171240736.jpgpost-21158-1171240776.jpg

post-21158-1171240908.jpgpost-21158-1171240970.jpg

post-21158-1171241067.jpgpost-21158-1171241242.jpg

Just email me at [email protected], PM here, or call me on (02)66333131 (Martin, best after 6pm)

I think my prices are reasionable but i am open to offers.

Thanks for looking,

martin

post-21158-1171240840.jpg

post-21158-1171241148.jpg

post-21158-1171241308.jpg

Edited by mmarschall

just curious are 32gtr coils the same as series 1 gtst? both external ignitors? will the just fit in? ive got the 32gtr head but if i can keep the coils i got then will be alot easier

ben...

Hey, sorry, im not sure about gtst coils, i think they may be different, maybe someone can answer you question in a different section of the forums? tech stuff?

the brace bolts to the cylinder itself and existing holes in the strut tower which is just infront of the cylinder.

thanks for the interest,

martin

  • 4 weeks later...

Bump, and decided to sell these too:

2X willans harnesses removed from my R32gtr before compliance. $200 the pair (or make an offer)

post-21158-1173663520.jpg

  • 5 months later...
  • 6 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...