Jump to content
SAU Community

Recommended Posts

Please tell me what to modify and why i should modify it. Im looking for a decent amount of power around 300ish. doeas anyone know the 1/4 time and 0-60 with 300HP?.Help me out here guys!!!! teach me the ways and give me the knowledge :P

Edited by CalgaryGTS4

Hey mate, i have a friend with a gts4 and he got sick of the poor performance from the RB20, within two months he was buying a half cut of a GTR and fitting all the parts from that himself.. What a weapon it is now. A few simple mods to the RB26 gave 12.1 sec quater mile times.. But thats just my opinion, not everyone can afford that option...

Hey mate, i have a friend with a gts4 and he got sick of the poor performance from the RB20, within two months he was buying a half cut of a GTR and fitting all the parts from that himself.. What a weapon it is now. A few simple mods to the RB26 gave 12.1 sec quater mile times.. But thats just my opinion, not everyone can afford that option...

How much would that run me Hp wise and Cash wise????

mate. instead of asking this. why not look through alot of the threads on here. believe it or not... in the last 5 years of these forums... 99.9% of the time someone else has gone through what u are going through now and has made a thread about it :P

How much would that run me Hp wise and Cash wise????

Im unsure on what a front cut is worth these days $5000-up maybe.. High flow turbos 2nd hand, and EMS ECU, maybe $3000.. As for hp he makes 370rwhp on 14psi..

Ok well no offence the guys who tell him to go search the forums .. thats time consuming and a forum is here to ask questions, Yes might have been asked before but cant hurt twice..

Now seems you have a GTS4 R32 ?? Suppose your looking into engine mods depending what your doing ..

My first choices would be Twin dump, High flow 5" body cat, 3.5" exhaust 4" cannon, FMIC, (im assuming its a GTS-T?) and PowerFC if you can find one .. If not remap the stock ECU .. That should square you off at $3000ish.. Including installtions .. Powerfc or remap is essental and Id suggest the straight through exhaust too .. FMIC is optional but if your going to tweak your boosts id suggest it going into higher PSI

Hope it helps .. Ofcourse you'll want to look at gauges, Boost controller and get a really nice tune too!

Just for kicks after that Id hit up new Injectors, or used flow tested etc.. about 550's new fuel - pump bosch 080? Hit up a new turbo and boost it sky high .. again hoping its turbo .. concidering your avatar is a turbo id assume so

Ok well no offence the guys who tell him to go search the forums .. thats time consuming and a forum is here to ask questions, Yes might have been asked before but cant hurt twice..
For the newbies we have this thing called "answers for things asked for the 100th time thread" aka > Stick Threads < :)

It pays to learn how to use the Search button properly...and yes there's even a thread on how to use it as well.

Just for kicks after that Id hit up new Injectors, or used flow tested etc.. about 550's new fuel pump bosch 040...
:P Edited by pkblade
hahah can u take out those abreviations on that mod list and tell me what they are hahah im kinda a noob still :)

FMIC = Front Mount Intercooler

ECU = Electronic Control Unit

Edited by pkblade

ok i see you have updated ur profile

r32 gts4

here my list

here we go

Aftermarket Ecu

-Apexi PowerFc $1000-$1500 (if you can find one)

Fuel Pump

-Nismo/Tomie $350

Injectors

-Nismo 740cc $800-$1000

AFM

-Z32 $300-$350

-Z32 Plug (can use an aus spec r31 afm plug, or buy the tomie one) $15-$30

Intercooler Kit

-Greddy M-spec $600-$800

-Greddy V-spl $1000-$1400

Turbo

-Stock Rb25 Turbo (from r33 or r34) $500

-HKS GT-SS $2000

there are just some examples,

NOTE: THIS DOES NOT INC LABOUR OR TUNING!

Tuning cost - $400-$600

Also Other mods i would consider!

Aftermarket Clutch

-$600-$2000 (depending on type, starting from the cheaper end Exedy Clutch, to then going to something like a hks or orc twin plate)

Coilovers

-Hks/Tein etc etc $1500 - $2000

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
×
×
  • Create New...