Jump to content
SAU Community

Recommended Posts

Hi all,

Just posting my R33 for sale, i'm in no hurry to sell it or need to sell it but i'm looking to purchase something else in the next couple months. Car was stock when it entered this country, i've owned the car for over 2 years and all mods have been done here. It is incredibly strong and one of the toughest street GTS-t's you'll ever see. Has been tuned by Dalton Automotive Geelong and built by a specialist engine builder Kaos Racing. Has cost me absolutely thousands as it has the best of everything. Recently dynoed on 14psi boost full street tune, pump fuel and it made 316rwkw! Engine has made 436rwkw on 35psi and C16. Details and pics below. You won't find a cleaner modded GTS-t that's street friendly with over 700hp! I may be open to trades on a car of lesser(cash adjustment) or equal value, R32/R33 GTR, XR6T ute or Dual cab 4X4.

Consider all offers above $30,000

Phone: 0414 224 905 or email [email protected] Please no time waster's or test pilot's.

Details:

· RB30 BLOCK

· RB25DET HEAD(NOW COMPLETELY RB26)

· NIZPRO NITRIDED/GRUB SCREWED CRANKSHAFT

· SCAT BILLET CON RODS

· ARP ROD BOLTS

· ARIES FORGED PISTONS

· GENUINE NISSAN HEAD GASKET

· RB26DETT VALVES

· RB26DETT VALVE SPRINGS

· GREX RB26DETT IN/EXH. CAMSHAFTS 280° /10.8mm LIFT

· JJR ADJUSTABLE IN/EXH. CAM GEARS

· TRUST CLEAR TIMING COVER

· RB26DETT ROCKER COVERS

· KAOS RACING INTAKE PLENUM

· KAOS RACING BILLET FUEL RAIL

· RX-7 550CC INJECTORS (SOON BEING REPLACED WITH 1000CC ITEMS AGAIN)

· MALPASSI RISING RATE FUEL REGULATOR

· BOSCH 044 FUEL PUMP (2x 044 PUMPS SOON)

· KAOS RACING STAINLESS SURGE TANK

· KAOS RACING STAINLESS CATCH CAN

· STAINLESS STEEL HI-MOUNT EXH. MANIFOLD/SCREAMER PIPE

· XTR T66/T04R TURBO

· TURBOSMART 48MM EXTERNAL WASTEGATE

· HD SINGLE PLATE CLUTCH

· ARP FLYWHEEL BOLTS

· MICROTECH LTX12S ECU

· MICROTECH DASH

· MSD DIS-4 IGNITION

· BDG EXTERNAL OIL PUMP

· TRUST FMIC

· XF THROTTLE BODY

· HKS OIL CAP

· GREDDY PROFEC B SPEC II EBC

· 3†BLITZ NUR SPEC STAINLESS EXHAUST

· K & N POD FILTER

· JNT PERFORMANCE TURBO BELL MOUTH

· ALLOY STRUT BRACE

· AUTOMETRE 5†MONSTER TACHO

· AUTOMETRE BOOST GAUGE

· AUTOMETRE OIL PRESSURE GAUGE

· TURBO TIMER

· RAZO SHORT SHIFT KIT

· TOMEI GEAR KNOB

· PERSONAL STEERING WHEEL

· RAZO BILLET PEDALS

· REMOTE START AND ALARM

· PIONEER CD PLAYER W/ REMOTE

· PIONEER 10†SUB WOOFER IN PIONEER BOX

· PIONEER DOOR TWEETERS

· MTX ROAD THUNDER AMP

· 17x10†DEEP DISH ALLOY WHEELS

· TRUST/GRACER FRONT BAR

· CUSTOM GTR CENTRE GRILL

+ MORE!

jismo028.jpg

jismo008.jpg

jismo014.jpg

sheet.jpg

Edited by nismomiles33
Link to comment
https://www.sau.com.au/forums/topic/156052-fs-430rwkw-rb2630-r33-22000/
Share on other sites

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

Hopefully high 10's low 11's with slicks.. The majority of this setup was in a Manual VL wagon I have, it ran low 11's first time out, on 15psi boost, and street 225 tyres. So I imagine this car will be very similar to the VL in street tune as the R33 get's better traction.

Edited by nismomiles33

Nah nothing I can upload as yet mate, it was filmed down at Dalton's on the dyno and was supposed to be uploaded to the Dalton Automotive site at some stage ; )

Any offers? May trade for lesser value car plus difference in cash.. GTR, XR6 Turbo ute, possibly dual cab 4x4 ute nice car of interest, just after a change. :D

Hey man,

Is the gearbox still factory or has it also been modified?

Hey mate, yeah still going strong on the factory box.. No whines or anything does everything perfect, so I figure why replace it? I suppose being RWD it's not under as much stress driveline wise a 4WD skyline with mega grip. If it ever breaks on me i'll put in a dogbox though, but don't see it happening as I dont abuse the car :laugh:

  • 3 weeks later...
  • 2 weeks later...
  • 1 month later...

Big price drop $26,500, no more dreamers or stupid swap offers. May negotiate slightly for cash. If you are serious you will call not sms, first to see will buy.

Ph: 0414 224 905

Edited by nismomiles33

Thanks for the comments. MSD setup was around $700 odd for memory and I run bosch coils like on late Commodores, provides heaps of spark can nearly tig weld with it :rofl: Lag isn't too bad, more boost the less it is, turbo needs to run above 18psi to be happy but you never race someone taking off in 5th. Car is soon to be featured in Zoom/HPI magazine.

  • 1 month later...

Just had Microtech upgraded, new bosch coils, new plugs and MSD serviced. Buy yourself a weapon! $26,500 or may part trade car of interest or late model road bike plus cash my way.

Also have VIC number plates for sale "SKILNE" black and white slimline brand new never been on car. $2500ono

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...