Jump to content
SAU Community

Recommended Posts

Hi all,

Just posting my R33 for sale, i'm in no hurry to sell it or need to sell it but i'm looking to purchase something else in the next couple months. Car was stock when it entered this country, i've owned the car for over 2 years and all mods have been done here. It is incredibly strong and one of the toughest street GTS-t's you'll ever see. Has been tuned by Dalton Automotive Geelong and built by a specialist engine builder Kaos Racing. Has cost me absolutely thousands as it has the best of everything. Recently dynoed on 14psi boost full street tune, pump fuel and it made 316rwkw! Engine has made 436rwkw on 35psi and C16. Details and pics below. You won't find a cleaner modded GTS-t that's street friendly with over 700hp! I may be open to trades on a car of lesser(cash adjustment) or equal value, R32/R33 GTR, XR6T ute or Dual cab 4X4.

Consider all offers above $30,000

Phone: 0414 224 905 or email [email protected] Please no time waster's or test pilot's.

Details:

· RB30 BLOCK

· RB25DET HEAD(NOW COMPLETELY RB26)

· NIZPRO NITRIDED/GRUB SCREWED CRANKSHAFT

· SCAT BILLET CON RODS

· ARP ROD BOLTS

· ARIES FORGED PISTONS

· GENUINE NISSAN HEAD GASKET

· RB26DETT VALVES

· RB26DETT VALVE SPRINGS

· GREX RB26DETT IN/EXH. CAMSHAFTS 280° /10.8mm LIFT

· JJR ADJUSTABLE IN/EXH. CAM GEARS

· TRUST CLEAR TIMING COVER

· RB26DETT ROCKER COVERS

· KAOS RACING INTAKE PLENUM

· KAOS RACING BILLET FUEL RAIL

· RX-7 550CC INJECTORS (SOON BEING REPLACED WITH 1000CC ITEMS AGAIN)

· MALPASSI RISING RATE FUEL REGULATOR

· BOSCH 044 FUEL PUMP (2x 044 PUMPS SOON)

· KAOS RACING STAINLESS SURGE TANK

· KAOS RACING STAINLESS CATCH CAN

· STAINLESS STEEL HI-MOUNT EXH. MANIFOLD/SCREAMER PIPE

· XTR T66/T04R TURBO

· TURBOSMART 48MM EXTERNAL WASTEGATE

· HD SINGLE PLATE CLUTCH

· ARP FLYWHEEL BOLTS

· MICROTECH LTX12S ECU

· MICROTECH DASH

· MSD DIS-4 IGNITION

· BDG EXTERNAL OIL PUMP

· TRUST FMIC

· XF THROTTLE BODY

· HKS OIL CAP

· GREDDY PROFEC B SPEC II EBC

· 3†BLITZ NUR SPEC STAINLESS EXHAUST

· K & N POD FILTER

· JNT PERFORMANCE TURBO BELL MOUTH

· ALLOY STRUT BRACE

· AUTOMETRE 5†MONSTER TACHO

· AUTOMETRE BOOST GAUGE

· AUTOMETRE OIL PRESSURE GAUGE

· TURBO TIMER

· RAZO SHORT SHIFT KIT

· TOMEI GEAR KNOB

· PERSONAL STEERING WHEEL

· RAZO BILLET PEDALS

· REMOTE START AND ALARM

· PIONEER CD PLAYER W/ REMOTE

· PIONEER 10†SUB WOOFER IN PIONEER BOX

· PIONEER DOOR TWEETERS

· MTX ROAD THUNDER AMP

· 17x10†DEEP DISH ALLOY WHEELS

· TRUST/GRACER FRONT BAR

· CUSTOM GTR CENTRE GRILL

+ MORE!

jismo028.jpg

jismo008.jpg

jismo014.jpg

sheet.jpg

Edited by nismomiles33
Link to comment
https://www.sau.com.au/forums/topic/156052-fs-430rwkw-rb2630-r33-22000/
Share on other sites

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

Hopefully high 10's low 11's with slicks.. The majority of this setup was in a Manual VL wagon I have, it ran low 11's first time out, on 15psi boost, and street 225 tyres. So I imagine this car will be very similar to the VL in street tune as the R33 get's better traction.

Edited by nismomiles33

Nah nothing I can upload as yet mate, it was filmed down at Dalton's on the dyno and was supposed to be uploaded to the Dalton Automotive site at some stage ; )

Any offers? May trade for lesser value car plus difference in cash.. GTR, XR6 Turbo ute, possibly dual cab 4x4 ute nice car of interest, just after a change. :D

Hey man,

Is the gearbox still factory or has it also been modified?

Hey mate, yeah still going strong on the factory box.. No whines or anything does everything perfect, so I figure why replace it? I suppose being RWD it's not under as much stress driveline wise a 4WD skyline with mega grip. If it ever breaks on me i'll put in a dogbox though, but don't see it happening as I dont abuse the car :laugh:

  • 3 weeks later...
  • 2 weeks later...
  • 1 month later...

Big price drop $26,500, no more dreamers or stupid swap offers. May negotiate slightly for cash. If you are serious you will call not sms, first to see will buy.

Ph: 0414 224 905

Edited by nismomiles33

Thanks for the comments. MSD setup was around $700 odd for memory and I run bosch coils like on late Commodores, provides heaps of spark can nearly tig weld with it :rofl: Lag isn't too bad, more boost the less it is, turbo needs to run above 18psi to be happy but you never race someone taking off in 5th. Car is soon to be featured in Zoom/HPI magazine.

  • 1 month later...

Just had Microtech upgraded, new bosch coils, new plugs and MSD serviced. Buy yourself a weapon! $26,500 or may part trade car of interest or late model road bike plus cash my way.

Also have VIC number plates for sale "SKILNE" black and white slimline brand new never been on car. $2500ono

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did and sync timing with light 
    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
×
×
  • Create New...