Jump to content
SAU Community

Recommended Posts

Hi all,

Just posting my R33 for sale, i'm in no hurry to sell it or need to sell it but i'm looking to purchase something else in the next couple months. Car was stock when it entered this country, i've owned the car for over 2 years and all mods have been done here. It is incredibly strong and one of the toughest street GTS-t's you'll ever see. Has been tuned by Dalton Automotive Geelong and built by a specialist engine builder Kaos Racing. Has cost me absolutely thousands as it has the best of everything. Recently dynoed on 14psi boost full street tune, pump fuel and it made 316rwkw! Engine has made 436rwkw on 35psi and C16. Details and pics below. You won't find a cleaner modded GTS-t that's street friendly with over 700hp! I may be open to trades on a car of lesser(cash adjustment) or equal value, R32/R33 GTR, XR6T ute or Dual cab 4X4.

Consider all offers above $30,000

Phone: 0414 224 905 or email [email protected] Please no time waster's or test pilot's.

Details:

· RB30 BLOCK

· RB25DET HEAD(NOW COMPLETELY RB26)

· NIZPRO NITRIDED/GRUB SCREWED CRANKSHAFT

· SCAT BILLET CON RODS

· ARP ROD BOLTS

· ARIES FORGED PISTONS

· GENUINE NISSAN HEAD GASKET

· RB26DETT VALVES

· RB26DETT VALVE SPRINGS

· GREX RB26DETT IN/EXH. CAMSHAFTS 280° /10.8mm LIFT

· JJR ADJUSTABLE IN/EXH. CAM GEARS

· TRUST CLEAR TIMING COVER

· RB26DETT ROCKER COVERS

· KAOS RACING INTAKE PLENUM

· KAOS RACING BILLET FUEL RAIL

· RX-7 550CC INJECTORS (SOON BEING REPLACED WITH 1000CC ITEMS AGAIN)

· MALPASSI RISING RATE FUEL REGULATOR

· BOSCH 044 FUEL PUMP (2x 044 PUMPS SOON)

· KAOS RACING STAINLESS SURGE TANK

· KAOS RACING STAINLESS CATCH CAN

· STAINLESS STEEL HI-MOUNT EXH. MANIFOLD/SCREAMER PIPE

· XTR T66/T04R TURBO

· TURBOSMART 48MM EXTERNAL WASTEGATE

· HD SINGLE PLATE CLUTCH

· ARP FLYWHEEL BOLTS

· MICROTECH LTX12S ECU

· MICROTECH DASH

· MSD DIS-4 IGNITION

· BDG EXTERNAL OIL PUMP

· TRUST FMIC

· XF THROTTLE BODY

· HKS OIL CAP

· GREDDY PROFEC B SPEC II EBC

· 3†BLITZ NUR SPEC STAINLESS EXHAUST

· K & N POD FILTER

· JNT PERFORMANCE TURBO BELL MOUTH

· ALLOY STRUT BRACE

· AUTOMETRE 5†MONSTER TACHO

· AUTOMETRE BOOST GAUGE

· AUTOMETRE OIL PRESSURE GAUGE

· TURBO TIMER

· RAZO SHORT SHIFT KIT

· TOMEI GEAR KNOB

· PERSONAL STEERING WHEEL

· RAZO BILLET PEDALS

· REMOTE START AND ALARM

· PIONEER CD PLAYER W/ REMOTE

· PIONEER 10†SUB WOOFER IN PIONEER BOX

· PIONEER DOOR TWEETERS

· MTX ROAD THUNDER AMP

· 17x10†DEEP DISH ALLOY WHEELS

· TRUST/GRACER FRONT BAR

· CUSTOM GTR CENTRE GRILL

+ MORE!

jismo028.jpg

jismo008.jpg

jismo014.jpg

sheet.jpg

Edited by nismomiles33
Link to comment
https://www.sau.com.au/forums/topic/156052-fs-430rwkw-rb2630-r33-22000/
Share on other sites

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

Hopefully high 10's low 11's with slicks.. The majority of this setup was in a Manual VL wagon I have, it ran low 11's first time out, on 15psi boost, and street 225 tyres. So I imagine this car will be very similar to the VL in street tune as the R33 get's better traction.

Edited by nismomiles33

Nah nothing I can upload as yet mate, it was filmed down at Dalton's on the dyno and was supposed to be uploaded to the Dalton Automotive site at some stage ; )

Any offers? May trade for lesser value car plus difference in cash.. GTR, XR6 Turbo ute, possibly dual cab 4x4 ute nice car of interest, just after a change. :D

Hey man,

Is the gearbox still factory or has it also been modified?

Hey mate, yeah still going strong on the factory box.. No whines or anything does everything perfect, so I figure why replace it? I suppose being RWD it's not under as much stress driveline wise a 4WD skyline with mega grip. If it ever breaks on me i'll put in a dogbox though, but don't see it happening as I dont abuse the car :laugh:

  • 3 weeks later...
  • 2 weeks later...
  • 1 month later...

Big price drop $26,500, no more dreamers or stupid swap offers. May negotiate slightly for cash. If you are serious you will call not sms, first to see will buy.

Ph: 0414 224 905

Edited by nismomiles33

Thanks for the comments. MSD setup was around $700 odd for memory and I run bosch coils like on late Commodores, provides heaps of spark can nearly tig weld with it :rofl: Lag isn't too bad, more boost the less it is, turbo needs to run above 18psi to be happy but you never race someone taking off in 5th. Car is soon to be featured in Zoom/HPI magazine.

  • 1 month later...

Just had Microtech upgraded, new bosch coils, new plugs and MSD serviced. Buy yourself a weapon! $26,500 or may part trade car of interest or late model road bike plus cash my way.

Also have VIC number plates for sale "SKILNE" black and white slimline brand new never been on car. $2500ono

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok guys thank you very much. GCG highflow it is then 🙂 
    • forgot to mention that when it does this it does not kill the engine, but I have not kept the pedal down long enough to let it, as I see no reason to beat up on it as its got to be something simple, small and dumb causing this.  And as soon as I let off pedal, the engine returns to its normal super smooth operation and rpms re-stabilize quickly, once below 4k. 
    • neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
    • Yeah my thoughts are the same, a well thought out WMI setup, would be slightly ahead of just straight E85 and you're also chemically intercooling the charged air, dropping it even further. This is why you need to add so much more fuel as soon as you spray. I remember someone taking me through their set up before (Dennis, has a R33, lives around Cabramatta - no idea if he's still around on this forum). He would target AFR 10:1 on 98, then as WMI ramped on, AFR would lean back up to 11:1. Amazingly, he did this all through his PowerFC, a relay to cut power to his EBC solenoid if there was not enough line pressure on his WMI kit. And of course, if there wasn't any boost made above gate pressure, you wouldn't be accessing the load cells with heaps of timing for WMI. One downside to that rudimentary setup, once the WMI came on, the EBC would unleash the dragon, and of course all the timing. Tyres would fry lol.
×
×
  • Create New...