Jump to content
SAU Community

Recommended Posts

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

Originally posted by Steve-SST

Yes but an RB Gemini.

Can anyone give me details about this RB Gemmy, or even better the no. for Steve Lee (& where he works).

Its just that I have a mate who has been keen for some time to bomb a Gemmy (as a little project) and many people have told him to chuck in a Rotary although he cant stand the noise and lumpiness of them & did in fact ask if any of the RB motors could be modified to fit.

Any details would be greatly appreciated.

Thanks

Adam,

Problem is that people that work in workshops, as opposed to mates or people that do stuff for "nothing", are busy and we dont gain a lot from diagnosing your problem for you and then you going off and fixing the problem yourself. Lumpy and I gave you a fairly accurate assessment of your issues when you came in, and we are more than capable of diagnosing and fixing the issues you have.

Other thing to bear in mind is workshops tend not to like repairing other people's mistakes, particularly when those mistakes have cost you your available fundage and you want it done on the cheap.

Jash

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...