Jump to content
SAU Community

Recommended Posts

i don't mean to take over your thread, i'm also curious about badge colour. I see many r33 series 1 skylines with a silver badge "S" badge on the front grill, and then I see some with the same shape "S" but it's coloured dark red, was this just a factory option, on my car it's silver

Link to comment
https://www.sau.com.au/forums/topic/156387-buying-a-car/#findComment-2912825
Share on other sites

i don't mean to take over your thread, i'm also curious about badge colour. I see many r33 series 1 skylines with a silver badge "S" badge on the front grill, and then I see some with the same shape "S" but it's coloured dark red, was this just a factory option, on my car it's silver

To the best of my knowledge it was part of the R33 type M package. My r33 also had a silver "S" on the grill, 4 door r33's have colour coded fins on the grill, not the black plastic ones like on the coupes aswell.

NTH: might help to post a pic, could even be an obscure aftermarket badge that the owner in japan fitted for all we know :happy:.

Link to comment
https://www.sau.com.au/forums/topic/156387-buying-a-car/#findComment-2913183
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...