Jump to content
SAU Community

Recommended Posts

i feel like my skyline is losing power (its nonturbo so it doesnt have much in the first place lol), how can i tell if im right? what are some signs i can look for or listen for?

i tried gunning it pedal to the metal, didnt even spin the wheels... i was like wtf, i flat foot it and it just feels sluggish, doesnt make any funny noises, wat can i do to get the power back?

all i can think of is, clean the airfilter or replace it? any other suggestions, i service it every 6 months at mobil

but i duno man help me out thanks fellaz.

Link to comment
https://www.sau.com.au/forums/topic/156391-signs-your-engine-is-losing-power/
Share on other sites

I wouldnt expect an NA 33 to spin the wheels during in gear acceleration (straight line). Unless its wet, in 1st or 2nd.

They are not a fast/powerful car. A commodore/falcon has more power. Maybe you are just getting used to it.

Fuel filter, air filter, check for flow through the cat (may be blocked) or any exhaust/intake restrictions. AFM clean also.

Get it compression tested, Get it seviced and check all filters, Oil filters, air filter etc etc.. Make sure no obstructions in exhaust i.e dints, cuts bumps and if that all fails take it to a mechanic and ask him to spin it up .. if he thinks it drives like shit get him to find the issue

each to their own but i wouldn't be too concerned about it, what id do would be put up with it and save some coin until you can replace it with a DET. if you dont want to do that then it could be a number of things...you also have to face the facts that its a 1400odd kilo car with a na 2.5lt in it, its not meant to be a fast car.

thanks fellas, i know its not a powerful car but im on my p's, 2 more years til im allowed to drive turbo, so i have plenty of time to save up... so excited. dw i aint gona do nothing stupid, i know to many people that have and are lucky to be alive. fun is for the track, main roads are for going from a to b.

Alright then "useful" not "usefull"

And you didn't even bother giving the lesson.

Speaking of said lesson. Are you sure you should be giving it? as you did not use a capital letter for the start of your sentance.

There is no need to get so anal about spelling on a car forum. Grow up.

Alright then "useful" not "usefull"

And you didn't even bother giving the lesson.

Speaking of said lesson. Are you sure you should be giving it? as you did not use a capital letter for the start of your sentance.

There is no need to get so anal about spelling on a car forum. Grow up.

Ha!

I'm not the one who is about to burst into tears..

Edited by Driver

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...