Jump to content
SAU Community

Recommended Posts

i feel like my skyline is losing power (its nonturbo so it doesnt have much in the first place lol), how can i tell if im right? what are some signs i can look for or listen for?

i tried gunning it pedal to the metal, didnt even spin the wheels... i was like wtf, i flat foot it and it just feels sluggish, doesnt make any funny noises, wat can i do to get the power back?

all i can think of is, clean the airfilter or replace it? any other suggestions, i service it every 6 months at mobil

but i duno man help me out thanks fellaz.

Link to comment
https://www.sau.com.au/forums/topic/156391-signs-your-engine-is-losing-power/
Share on other sites

I wouldnt expect an NA 33 to spin the wheels during in gear acceleration (straight line). Unless its wet, in 1st or 2nd.

They are not a fast/powerful car. A commodore/falcon has more power. Maybe you are just getting used to it.

Fuel filter, air filter, check for flow through the cat (may be blocked) or any exhaust/intake restrictions. AFM clean also.

Get it compression tested, Get it seviced and check all filters, Oil filters, air filter etc etc.. Make sure no obstructions in exhaust i.e dints, cuts bumps and if that all fails take it to a mechanic and ask him to spin it up .. if he thinks it drives like shit get him to find the issue

each to their own but i wouldn't be too concerned about it, what id do would be put up with it and save some coin until you can replace it with a DET. if you dont want to do that then it could be a number of things...you also have to face the facts that its a 1400odd kilo car with a na 2.5lt in it, its not meant to be a fast car.

thanks fellas, i know its not a powerful car but im on my p's, 2 more years til im allowed to drive turbo, so i have plenty of time to save up... so excited. dw i aint gona do nothing stupid, i know to many people that have and are lucky to be alive. fun is for the track, main roads are for going from a to b.

Alright then "useful" not "usefull"

And you didn't even bother giving the lesson.

Speaking of said lesson. Are you sure you should be giving it? as you did not use a capital letter for the start of your sentance.

There is no need to get so anal about spelling on a car forum. Grow up.

Alright then "useful" not "usefull"

And you didn't even bother giving the lesson.

Speaking of said lesson. Are you sure you should be giving it? as you did not use a capital letter for the start of your sentance.

There is no need to get so anal about spelling on a car forum. Grow up.

Ha!

I'm not the one who is about to burst into tears..

Edited by Driver

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • How much have you lowered?  I had 350Z springs in the rear and was able to pull the camber into factory spec with the factory arms on the rear, obviously the front ran negative camber as it isn't adjustable, but rotating the wheels regularly evened out the wear.
    • Either the installer needs to come back, you need an auto electrician, or you need to learn automotive electricals yourself.   First step Id look at is where that big thing came out of, is there still things unplugged at that location? Maybe they just forgot to put a relay in or something?
    • Well, this is probably where a wiring diagram and a multimeter come into play.
    • I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
×
×
  • Create New...