Jump to content
SAU Community

R33 Stock Turbo Water And Oil Lines Urgently Needed

Nightcrawler

By Nightcrawler,
in South Australia

 Share

Recommended Posts

Nightcrawler Grand Master

Nightcrawler

Posted
Posted

Hi, has anyone upgraded their turbo and have the old water and oil lines lying around? I desperately need these tonight or first thing tomorrow morning ..... I assume the R34 lines are the same too. Not sure about R32s, but if anyone knows that would be great too. I am happy to try anything at this point!

Thanks in advance!

Andrew

Nightcrawler Grand Master

Nightcrawler

Posted
  • Author
Posted

yeah thanks heaps Darren for putting me onto Jason!!!

Thanks heaps Jason - they worked a treat! Put the standard turbo, dump and water/oil lines back in, in under 2 hours!

The car fired first time and didn't leak any oil. We had a small water leak due to a petrified/cracked original turbo water return hose (the nasty one that goes behind the engine) but other than that everything worked out awesomely. Thanks again!

If you need advice/help on custom oil/water lines PM Dangerman (Darren) and I am sure he will help you out. I hope your slide high-flow gets here soon!

Nightcrawler Grand Master

Nightcrawler

Posted
  • Author
Posted

David (brother-in-law) had someone rear-end his R33 and push him into another car Friday week ago and they have written it off.

So we spent all weekend pulling all his mods off and returning it to stock.

Since he had a Garrett 2530 the oil and water lines were not stock, so when I went to put the lines on the stock turbo I came up stumped (they hadn't kept the original lines when changing the turbo). So luckily Jason came to the rescue and sold me his stock lines.

I rang you today Matt, but it said your number is disconnected. I thought I saw your GTR in Norwood .... but didn't know you were back in town? But it had GTR wheels on it .... other than that was identical to yours!

Nightcrawler Grand Master

Nightcrawler

Posted
  • Author
Posted

Let me know how you go with the lines Jason, as I think I am going to get new ones made for the 2530 - the standard banjo bots and metal lines system seem a pretty crap system to me.

whatsisname Grand Master

whatsisname

Posted
Posted (edited)

Good to hear it all came together in the end Andrew :domokun:

Sorry I didn't get back to you on Sun'. My humble apologies mate, I did ask Shaun on Sun' morning, but he forgot to check his spares pile - and I forgot to remind him. I owe you a beer!

Edited by whatsisname
Nightcrawler Grand Master

Nightcrawler

Posted
  • Author
Posted

no worries Matt, thanks for your help anyhow. I actually forgot to ring you/Shaun Sunday morning anyhow to say don't bother since I had sourced some from Jason. Ah well, it all worked out in the end, the car is now gone to the insurance mob to be auctioned (I might yet buy back the wreck for fun), and I have a 2530 64T sitting in my garage :)

chops Experienced

chops

Posted
Posted
no worries Matt, thanks for your help anyhow. I actually forgot to ring you/Shaun Sunday morning anyhow to say don't bother since I had sourced some from Jason. Ah well, it all worked out in the end, the car is now gone to the insurance mob to be auctioned (I might yet buy back the wreck for fun), and I have a 2530 64T sitting in my garage :)

So, I know that turbo isn't going on your car, but when IS it going on your car?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...