Jump to content
SAU Community

Recommended Posts

also met some new people. and the R32 GTR the GTT raced got a 13.1 and 1.8 60ft.. quite good for stock.hope join soon mate.

yeh i was pretty happy with that time, i only got one more run but that was a 13.2 They ended up cancelling before i got a 3rd go haha :)

Edited by drf76
  • Replies 153
  • Created
  • Last Reply

Top Posters In This Topic

yeh i was pretty happy with that time, i only got one more run but that was a 13.2 They ended up cancelling before i got a 3rd go haha :P

hey mate.

that u its mark. with the R34.

u did pretty well for urself. im sure my GTR would pull off much the same times.. with a so called shane pussy launch.. :)

good to see u on the forums..

Hopefully the driver of the rail car wasnt a fatality - that would be a damn shame!

I didnt get to see too many skylines there - i was lookin for you guys but i was configned to the pit area for the rest of the night - red silvia EAT17 plates...

Anywho was an interesting night, i ran a best of 12.3@126mph with a 2.0 60 foot - my car wasnt really hooking up with my micky thompson et streets that well - came pretty close to the wall on one occasion. Still the purpose was to increase my half track to full track mph with my cam gear adjustments and i picked up about 5mph top end without it tuned properly- pretty happy about that.

On a sidenote i got done on the way home by dept of transport - they setup a roadblock and suffice to say i got reamed as they knew what they were lookin for - although the blokes where really nice so it didnt really bother me.

yes i dare say col would be in the 11 bracket with the mph down the track, god damn traction?? That seemed to be the issue with many cars there tonight, although had to leave early sorry didnt say cya to ya noel :P awell good night as i saw it. Cant wait till the 17th

Hopefully the driver of the rail car wasnt a fatality - that would be a damn shame!

On a sidenote i got done on the way home by dept of transport - they setup a roadblock and suffice to say i got reamed as they knew what they were lookin for - although the blokes where really nice so it didnt really bother me.

Dude, where was the roadblock?

Hopefully the driver of the rail car wasnt a fatality - that would be a damn shame!

I didnt get to see too many skylines there - i was lookin for you guys but i was configned to the pit area for the rest of the night - red silvia EAT17 plates...

Anywho was an interesting night, i ran a best of 12.3@126mph with a 2.0 60 foot - my car wasnt really hooking up with my micky thompson et streets that well - came pretty close to the wall on one occasion. Still the purpose was to increase my half track to full track mph with my cam gear adjustments and i picked up about 5mph top end without it tuned properly- pretty happy about that.

On a sidenote i got done on the way home by dept of transport - they setup a roadblock and suffice to say i got reamed as they knew what they were lookin for - although the blokes where really nice so it didnt really bother me.

bugga dude. where was the roadblock?

mark u softcork learn to do a skid :P

i was pretty disappointed with col and jared's cars, what was the go guys? :P

Yeah I'm pretty pissed to.

I couldn't get it to hook up and I got 2 bad starts and Mr clutch was slipping a lot at the end. I was going to save up and get a triple plate clutch but stuff this I'm going to put the single plate Ive got in it for now and get it re-tuned so it will perform a bit better.

2nd

I blew a hole through the exhaust on the way home some where i gotta find it this morning

3rd

Im never going on a Saturday again its crap those shit box v8's kept doing oil downs and stuff like that. Even the line to get a drink was as long as.

Hopefully the driver of the rail car wasnt a fatality - that would be a damn shame!

I didnt get to see too many skylines there - i was lookin for you guys but i was configned to the pit area for the rest of the night - red silvia EAT17 plates...

Anywho was an interesting night, i ran a best of 12.3@126mph with a 2.0 60 foot - my car wasnt really hooking up with my micky thompson et streets that well - came pretty close to the wall on one occasion. Still the purpose was to increase my half track to full track mph with my cam gear adjustments and i picked up about 5mph top end without it tuned properly- pretty happy about that.

On a sidenote i got done on the way home by dept of transport - they setup a roadblock and suffice to say i got reamed as they knew what they were lookin for - although the blokes where really nice so it didnt really bother me.

Sorry to hear mate. Im glad I missed that

We left a bit early becuase the oil downs all the time and the lines were massive and not going anywhere im glad we did now by the looks of it

Sorry to hear mate. Im glad I missed that

We left a bit early becuase the oil downs all the time and the lines were massive and not going anywhere im glad we did now by the looks of it

Werd. For all their noise they are just a pain in the arse. Every time delay was from some v8 shitting itself. Take them back to the shopping centre car parks where they belong.

The other annoyance were the v8 tools trying to win the race in the staging lanes. Just revving the tits off them for no reason other than they can.

Werd. For all their noise they are just a pain in the arse. Every time delay was from some v8 shitting itself. Take them back to the shopping centre car parks where they belong.

The other annoyance were the v8 tools trying to win the race in the staging lanes. Just revving the tits off them for no reason other than they can.

Yep v8 shit tins. For the people going next Saturday. I was talking to col and theres a big meeting on the same day or the day after, so theres going to be a heap more shit tin V8's there getting in there oil down practices in. So be prepared for the wait.

Well Put it this way I got there at 4:40 around abouts and from there to 8:30 I got 3 runs in and its only going to be worse on the 17th by the sounds of it what a waste of time

Maybe the wednesday night sessions might be a better option?

yep..

was good last time i went to watch on wednesday.

i got ther at 4.30ish lined up near noel. and ran a BNR32 at around 5 or 6pm.. was pretty shitty with all the hold ups.. but goin from ryans pics at 3.30 when col was running ther looked to be 3 or 4 cars in the lanes.. so best to get a few runs in really early. :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
×
×
  • Create New...