Jump to content
SAU Community

Ffs Someone Please Find Me A Power Fc For My Rb20det

R32-PSH77

By R32-PSH77,
in Queensland

 Share

Recommended Posts

R32-PSH77 Enthusiast

R32-PSH77

Posted
Posted

Hi guys.. i really really want to gert my ahnds on a power FC but considering they are now discontinued there impossible to find..

there was one on AU eBay that went for 1700 without a fkn hand controller.

and there is a couple on USA eBay for 1500USD - thats Friggin 1932.07 AUD with out a hand controller.. might as well get a haltech for that..

So does someone know of a website.. or a trader or some store that has any left for an Rb20det and if so PLEASE pm me the Details.

Regards, Adam

Col-GTSX Grand Master

Col-GTSX

Posted
Posted

Rb20's require the AP Eng Version of the pfc.

They retailed for about $1700 when they were around.

The cheapest ones got down to about $1500 and none of them ever came with a hand controller out of the box.

So dont confuse them with an RB25 pfc which are all round $1000 with a hand controler...

So now they are even harder to come by you would have to expect the price to go up...

You will be lucky to find one at all very soon, unless someone writes their car off and is despirate for the cash...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      What brakes on R34 GTT(Europe)

      By Kinkstaah · Posted

      Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • niZmO_Man
      Lock up the old for sale / wtb threads.

      By niZmO_Man · Posted

      Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • Kinkstaah
      R34 Gtt Wheel Offset Advice

      By Kinkstaah · Posted

      This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...