Jump to content
SAU Community

Recommended Posts

hey again

wanna run my car down the 1/4 as i have previously stated but i want to be realistic and run with my street tyres.. i got 18 in rims on it now and wanna know what tyre to go for... either a 255/35/18 or 245/40/18?

a friend told me to go for the 245's cause of its higher profile.

i have no clue..

Link to comment
https://www.sau.com.au/forums/topic/157365-2553518-vs-2454018s-for-the-14/
Share on other sites

You will probably get a faster time with smaller inch rims..

Im no expert either..

but i remember when i was at the drags, a guy from this forums put his stockies on and got a much better time than his 18 inch rims lol...

Anyways i dont think you will find some difference between them.. It will come down to your launch, and how well the rubbers grip..

Do the 255s, have better rubber than 245s??

You will probably get a faster time with smaller inch rims..

Im no expert either..

but i remember when i was at the drags, a guy from this forums put his stockies on and got a much better time than his 18 inch rims lol...

Anyways i dont think you will find some difference between them.. It will come down to your launch, and how well the rubbers grip..

Do the 255s, have better rubber than 245s??

im not too sure but a friend who works with tyres told me that the 40 profile is better for the strip

the larger profile will give you more grip as the side wall will have a bit more flex so in s triaght line you the tire wont spin up as easily, i would also lower your tire pressure to give you a geater contact area with the road

have fun at the drags

I'd say there would not be much in it running the 18s.

The 255 gives you up to 10mm more width. I say up to as a tyres width rating is a maximum width allowed meaning it could in fact be smaller. Wheels or Motor mag did a tyre comparo a while ago with a variety of 245 wide 17s and only one make of tyre (the cheapest) actually measured up to 245 wide, the rest were all narower.

The 245 tyre will give you around 9mm more sidewall which is ideal for drag but make your overall diameter 18mm taller.

I guess if one had to be chosen it would be the 245 but thats assuming both tyres are the same make etc.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I'm not a drag racing guy, but that was a good watch. Didn't Ibrahim's car have some cooch! But the big question is....WTF is with so many of them running without seatbelts!
    • Sequential Is fine to drive on the street
    • Well that is not a sign of good quality..  Understand, but not so nice to drive on the street I suppose and out of my price range..
    • I recently got myself a 1989 r32 GT-R and it has some slight smokiness from the exhaust and misfires sometimes when coming off the throttle. I'm looking for a good mechanic in the Brisbane region who will do a good job on it. It'll need a diagnosis, and most likely an engine rebuild with refurb/stock parts (not looking for a motorsport build... yet). If anyone has done something like this before/knows stuff about this in terms of who can do it and how much it cost, I'd like to hear about it. I was looking on the forum and I found some posts from 2020 that were similar to this, but it has been a while since then so if anyone has any updated info that would be great.  I'm also new to the forum so if this topic should be in a different place please let me know. Thanks in advance!  
    • Stretching my memory now but about 10,000kms. After that I had a hissy fit. In went in a OS88 sequential then a PPG sequential. The extra gear is a game changer. 
×
×
  • Create New...