Jump to content
SAU Community

Recommended Posts

and well no ticking when cold, only when hot.

this is the final proof you need it's the manifold or dump or turbo gasket. as when cold everthing is nicely sealed. once things heat up and start to expand your leak begins.

wogs, it's all to do with the quality of the gasket material.

I'll give you an example. With aftermarket gaskets, say like the dump gasket, they're usually two pieces of thin foil with goo sandwitched between.

Those are pretty crap, and don't last that long. The crap in the middle can get blown out and it leaks.

The genuine nissan dump gasket/turbo to manifold gasket is a solid metal gasket. I think it's copper.

It's really hard work to do all the gaskets/studs. As 31nismoid said, it'll be 6-800 if you get a workshop to do it, and the same amont of work if you do it yourself.

That's why I always use genuine gaskets, coz I don't want to have to do it again.

Think of it this way, your nissan gaskets have lasted 10 year. If you do it now, it'll last another 10. That's not much in the scheme of things. If you use goo gaskets, they might blow in 2 years.

If the gasket material of the aftermarket gasket is good, then that's cool. use it. but check it. don't get it just coz it's chepaer

Hi,

Can you hear the ticking pretty easily when standing next to the side of the car or do you actually have to be under or in the engine bay to hear it? Reason I ask as mine makes a ticking noise when cold but I notice it dissapears when hot. I noticed it after I changed to a different brand of oil. I went to Motul instead of Mobil 1

Cheers

Chris

you can hear it slightly if the bonnet is shut and standing next to the car, but if you put your head down, you can hear it easily.

I have also swithced to a different oil, however i do not think that is my problem. Time will tell.

[Threadjack]

I have a strange ticking noise when I give my car a little rev, dont think it's the injectors. On idle there is no ticking but if I rev it to say 2000rpm it's ticking while rev goes up. If I hold the rev at 2000 it doesn't tick. It's only there when I rev it :)

[/Threadjack]

  • 3 years later...

Hey guys,

Sorry for the thread digging - but I like searching for past info then dump the same problems in new threads. I think I've got the same gasket problem mentioned here but need your guys advice!!

Anyway, I drove hard at Eastern Creek on friday - on the drive home out of nowhere I start hearing this noise - similar to what has been said in the above posts.

It's a ticking sound, pretty much coming solely from the turbo. Here's a vid I took.

The coilpack cover/turbo heat shield and other bits and pieces have been removed to specify the source of the noise, there usually in place normally.

What do you reckon? Gaskets?

Oh, I should also add

oil pressure remains fine, car feels very underpowered, still on stock boost, but I can get maybe around 5psi out of the turbo if i give it a real bootful (which I'm not really inclined to do)

Mods are:

3" turbo back

FMIC

Turbosmart boost tee

Stock ECU

Change tha damn gasket Floyd!!

It sounds like the manifold to turbo gasket has blown out a part of the gasket.

Replace with a new genuine nissan one and it'll be sweet!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...