Jump to content
SAU Community

Recommended Posts

Hi ppls

I know alarms is a very popular topic and all, and yes, I have done a search on the forum for alarms and read the posts about em, but I don't seem to find much mention of an alarm that offers:

>= 3 immobilisation pts

remote start

ability to add aftermarket turbo timer

Those are pretty much the only features (apart from the usual alarm stuff) that I am looking for

- I heard Brandt may be able to pop a TT on, but some say there are problems

- I know Cobra alarms allow TTs but no remote start

- Boomerang has a remote start and TT, but no provisions for an aftermarket one, and apparently only 1 immob pt (WTF?)

Can anyone help identify any alarms which provide those features?

Thanks

kW

Link to comment
https://www.sau.com.au/forums/topic/15750-alarms-with-remote-start/
Share on other sites

You could try AUTOWATCH. Its called the 288RLI. They have remote start but have two immobilser circuits with and extra auxillary immobiliser circuit which you'll need an extra relay for. Autowatch also have other alarms which have 3 immobiliser circuits but no remote start. Its not Australian though, its South African. Very good quality from what ive used.

in regards to two-three point immobilisation - it is just a matter of intercepting vital circuits with a relay to cut their function (ie starter, fuel pump, ignition circuit etc)

you can use a single immobiliser cut out point to run more than one relay (given the current of the relays combined doesn't exceed the maximu for the alarm output)

hence it is possible to use a two output point immobiliser to cut out say four points

so u reckon that 2 point immobs only uses single output?

what u think about 3 point immobs then? u think they only use a single output point too?

Tony - which remote start systems have 1st gear lockouts? What is that anyway? Will this prevent the car from being put into 1st gear when the car is off (hence preventing disaster when u try to look cool to the chicks and start the car and the car starts getting jiggy wit it)?

I've been told that the 3rd immobiliser, used to cut out the fuel pump has caused problems in the past when cars break down which is why most manufacturers don't make them any more. Not sure exactly what the problem is. I only got the 3rd one for insurance reasons.

I assume most remote start systems have the option of the gear lockout. The viper does but it doesn't fit in the Skyline. All it does is stops the remote start from working if it is in gear.

i think the alarm systems with more than one cut out point have separate output wires from the control unit.

this way if one relay gets traced and shorted the other would still need to be located. usually though i think you would have the relays near the control unit and if they find that you're stuffed anyway

Think about it people, how many of you have turbo timers? And if you don't then im sure you sit and let it idle to cool down for a few mins depending on how hard you've been driving it right? Then why exactly would it be in gear when you go to use your remote starter? Personally i don't have a starter, and really dont have any need for one.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Stop looking at the garage floor, and turn the radio up a bit louder if there's any strange noises...
    • No. Turbo shuffle and surge/flutter are not the same thing. Specifically, on a GTR, turbo shuffle has a definite meaning. On a GTR, the twin turbos are assumed to be the same thing and to operate the same way, exactly. In reality, they do not. Their exhaust sides are fed and exhaust a little differently, to each other. Their inlet sides are fed and exhausted a little differently, to each other. Consequently, when they are "working" they are often at slightly different points on the compressor map compared to each other. What this means, particularly when coming on boost, is that one of them will spool up and start producing extra flow compared to the other, which will put back pressure on that other compressor, which will push the operating point on that other compressor up (vertically). This will generally result in it bumping up against the surge line on the map, but even if it doesn't, it upsets the compressor and you get this surging shuffle back and forth between them That is "turbo shuffle" on a GTR. It is related to other flutter effects heard on other turbo systems, but it is a particular feature of the somewhat crappy outlet piping arrangement on RB26s. There are plenty of mods that have been attempted with varying levels of success. People have ground out and/or welded more material into the twin turbo pipe to try to prevent it. Extending the divider inside it works, removing material doesn't. There are aftermarket replacement twin turbo pipes available, and these exist pretty mush purely because of this shuffle problem.
    • You can temporarily* use lock collars to keep it in place until you can do the bushes, back the nuts off, slide them in, snug back up. *temporarily is often for ever
    • Thanks for the quick reply. To be clear, when you say turbo shuffle do you mean turbo flutter "stustustu" or referring to something else? I had thought they were the same thing. When I wrote the post my intention was to say it wasn't a flutter/compression surge sound. My understanding was that a flutter sound would be occurring when throttle is released, whereas I can keep the throttle in the same position for this noise
×
×
  • Create New...