Jump to content
SAU Community

Recommended Posts

I have looked EVERYWHERE for my boost solonoid hopeing to earth the black wire to disable to 2 stage control thingy. Anyway I can't find it. As far as Im aware its suposed to be just near the air intake, and have a hose or 2 connected to it as well as some wires. Looked at pics and everything and yeah....either im stupid or it isnt there. What I did find today is around where its suposed to be is a hose that leads into some pipe which is blocked with a screw. This means what exactly? Im assuming the previous owner has fiddled with the boost level. (As far as im aware the car runs stock boost). I can't find the black/white wires either, theres just a mass of wires that run past my turbo.

If there is a bleed valve or EBC installed im at a loss to find that as well.

Anyone have any ideas on what could have been done?

I wouldnt mind seeing some pics of what other peoples setups are if your boost solonoid is missing. The only reason it would be gone is because the previous owner has raised boost yeah?

Yes, it would be near my pod on the passenger side yeah? Cause mines just plain not there.

Yes it should be there. You can see a tiny bit of the airflow meter on the bottom left of the pic.

It's been removed obviously. I'd say the previous owner had a boost controller in there and removed it before selling (the screw in the hose is a bit of a giveaway). You'll probably find the actuator is now directly connected to the boost signal (same as a 32gtst).

And that means you are running less than stock boost. Time for a bleed or an ebc :(

Edited by BHDave

I was wondeirng that. Stock solenoid gone without anything in its place would mean 5 psi only yeah? Innnnteresting. Actually thats kind of good...means if I goto 10psi Ill get quite a shock. Time to shop for a boost controller.

Ok now this is really bugging me. Was out driving this morning, and I confirmed that I definetly DO have the dual stage boost thing. Below 4,500RPM the stock guage would get to exactly halfway between 0 and +7, but above 4500rpm it would go up a bit.

Yet I can't find the bloody solonoid anywhere.

Any 33 owners who know what they are looking at live in the Blue Mountains? I need someone to have a look at my car and tell me exactly what im dealing with.

the easiest way is to locate your actuator and see where the line from it is running. thats what will be governing your boost.

this is what an actuator looks like. its the brass coloured thing with the green dot on it.

IMG_1912.jpg

Ok the hose coming off the actuator just goes straight to a fat pipe, which I believe goes down past the Pod to the Intercooler? Gah. I just dont get how if I dont have said solonoid, why I still have the dual stage boost thing. Theres also a thiner hose (not off the actuator though) with a screw through it. As said before by someone, it would seem a boost controller was used by the previous owner. Maybe its still there? I don't really know what im looking for but im pretty sure its not

Im not stressing really, just trying to get a sense of what the previous owner has done to the car. Suposedly it was stock except for a BOV and POD, but now I find the solonoid missing, which suggests upped boost etc and it just makes me wonder what else was done.

yeah i know what u mean...but dont worry about it. whenever you buy a car, you buy it on it's merits, not what the seller tells you, otherwise ur screwed. so if your happy with the car, forget all that shit.

try a turbotech manual boost controller as manwhore said. set ur boost and be happy.

well, at some stage, most likely a boost controller has been run. That's not to say that your car is a lemon or anything.

Bitta extra boost is no problem. We all do it anyways.

Your previous owner might not have lied to you. He might have bought it from japan like that thinking it's stock.

it's alright mate. If the whole car is nice, reliable, runs well, no problems, then that is what it is. a good car. Wehther it's had a boost controller doesn't mean it's deflowered or anything.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
    • Turn up your speakers https://youtu.be/5_GK5ChNjOs?feature=shared
    • This thing did a 1:20.88 at Winton on the weekend which is f**king rapid.  Well done mate, your driving has really gone up a few notches not much left on the table now! Good luck at WTAC.   https://www.facebook.com/share/r/1MHyZQBqZ2/  
    • Are you guys meeting up with the Sydney SAU guys at Lambton Pool Carpark or heading straight in?
×
×
  • Create New...