Jump to content
SAU Community

Recommended Posts

I have looked EVERYWHERE for my boost solonoid hopeing to earth the black wire to disable to 2 stage control thingy. Anyway I can't find it. As far as Im aware its suposed to be just near the air intake, and have a hose or 2 connected to it as well as some wires. Looked at pics and everything and yeah....either im stupid or it isnt there. What I did find today is around where its suposed to be is a hose that leads into some pipe which is blocked with a screw. This means what exactly? Im assuming the previous owner has fiddled with the boost level. (As far as im aware the car runs stock boost). I can't find the black/white wires either, theres just a mass of wires that run past my turbo.

If there is a bleed valve or EBC installed im at a loss to find that as well.

Anyone have any ideas on what could have been done?

I wouldnt mind seeing some pics of what other peoples setups are if your boost solonoid is missing. The only reason it would be gone is because the previous owner has raised boost yeah?

Yes, it would be near my pod on the passenger side yeah? Cause mines just plain not there.

Yes it should be there. You can see a tiny bit of the airflow meter on the bottom left of the pic.

It's been removed obviously. I'd say the previous owner had a boost controller in there and removed it before selling (the screw in the hose is a bit of a giveaway). You'll probably find the actuator is now directly connected to the boost signal (same as a 32gtst).

And that means you are running less than stock boost. Time for a bleed or an ebc :(

Edited by BHDave

I was wondeirng that. Stock solenoid gone without anything in its place would mean 5 psi only yeah? Innnnteresting. Actually thats kind of good...means if I goto 10psi Ill get quite a shock. Time to shop for a boost controller.

Ok now this is really bugging me. Was out driving this morning, and I confirmed that I definetly DO have the dual stage boost thing. Below 4,500RPM the stock guage would get to exactly halfway between 0 and +7, but above 4500rpm it would go up a bit.

Yet I can't find the bloody solonoid anywhere.

Any 33 owners who know what they are looking at live in the Blue Mountains? I need someone to have a look at my car and tell me exactly what im dealing with.

the easiest way is to locate your actuator and see where the line from it is running. thats what will be governing your boost.

this is what an actuator looks like. its the brass coloured thing with the green dot on it.

IMG_1912.jpg

Ok the hose coming off the actuator just goes straight to a fat pipe, which I believe goes down past the Pod to the Intercooler? Gah. I just dont get how if I dont have said solonoid, why I still have the dual stage boost thing. Theres also a thiner hose (not off the actuator though) with a screw through it. As said before by someone, it would seem a boost controller was used by the previous owner. Maybe its still there? I don't really know what im looking for but im pretty sure its not

Im not stressing really, just trying to get a sense of what the previous owner has done to the car. Suposedly it was stock except for a BOV and POD, but now I find the solonoid missing, which suggests upped boost etc and it just makes me wonder what else was done.

yeah i know what u mean...but dont worry about it. whenever you buy a car, you buy it on it's merits, not what the seller tells you, otherwise ur screwed. so if your happy with the car, forget all that shit.

try a turbotech manual boost controller as manwhore said. set ur boost and be happy.

well, at some stage, most likely a boost controller has been run. That's not to say that your car is a lemon or anything.

Bitta extra boost is no problem. We all do it anyways.

Your previous owner might not have lied to you. He might have bought it from japan like that thinking it's stock.

it's alright mate. If the whole car is nice, reliable, runs well, no problems, then that is what it is. a good car. Wehther it's had a boost controller doesn't mean it's deflowered or anything.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
    • List all of your mods. It sounds like an aftermarket ECU hitting rev limiter. Like a valet mode, or a cold rpm limiter? 
    • @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
×
×
  • Create New...