Jump to content
SAU Community

Recommended Posts

Searched, and not found any concrete answers......

Can some one please tell me a definate part number (genuine, and/or non- genuine) for the R32 gts-t's RB20DET timing belt, and the water pump.

I want to be sure, so I dont have to pull it apart before I buy parts..

I have heard that the water pump is the same as the RB30 locally offered motor, but then I have heard that a bolt hole doesnt line up properly..

Where can I get a timing belt from, if not only the nissan dealer.. (I'm in Adelaide, southern suburbs) Tried motortraders, repco, sprint auto..no such luck..

Surely some of you R32 gtst owners have done the belt change yourselves? Or does everyone pay someone else to do it?

Any help is appreciated!

Steve

Link to comment
https://www.sau.com.au/forums/topic/15821-r32-gtst-timing-belt-water-pump/
Share on other sites

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

I was told that the water pump was the same as the VL ones, i ended getting a genuine one from nissan the suit the rb20 for about $100 so it was not much more than the cheap ones. I then got a gasket from roccas for a VL and it was the same as the water pump so the bolt holes are the same but i cant be sure they are identical.

Nissan is the only place you will probably find a timing belt. Try diff dealers as the price varies a lot for all parts, i get my stuff from north east nissan and get stuf the next day from melboure, they have most parts there.

water pump is the RB30 one, you can order it through coventrys, around $80-90 from memory

i called a nissan dealer and asked for an RB20DET timing belt... never got the part number

be warned youll need a rattlegun for the crank pulley bolt. its actually a job better tackled by a workshop. (i try and do everything myself as well, but sometimes it just aint worth it)

To remove the harmonic balancer you will need a harmonic balancer remover kit some thich washes and 6mm bolts that are fairly long as they screw in to the harmonic balancer.

The bolt is fairly easy to remove.

But I am bodgy when I work as I get angry easily when working on cars.

With the Nissan belt you get markings on the belt that line up with the cam gears. When purchasing the new belt I found that my head had previously been off and who ever replace the cam belt previously had thrown out the crank gear timing by 1 tooth.

As far as I know the non genuine belt doesn't have any markings.

The price for the genuine belt is $100.

Cheers all, looks like I'm off to chat with the Nissan blokes.

I do some work for a nissan dealer, so hopefully the parts section will be nice to me. Was hoping to get the bits from somewhere that was NOT nissan, but ahh well..

As for the puller, Who did yours -Joel-?

Can I buy a puller that will do the job from somewhere?

I'd rather do the job myself, I simply don't trust any workshops, nor want to pay more then I have to. I do all of my own mech. work.

Any other info would be uber-helpful :)

Cheers,

Steve

I did mine my self.

Wasn't hard.. I bought the puller from Sprint Auto Parts or Rocker Bro's.. One of them was cheaper than the other I can't remember. :D

Have a look at your harmonic balancer tomorrow, you will notice two small threaded holes on either side of the center nut that holds the harmonic balancer on. You will need two longish Hightensile Bolts that will be long enough to screw in and also reach the puller. You will also need some thick washers that won't bend as the bolts you buy will be to small for the puller hence you need washers.

Seriously get the genuine cam belt its got the markings on it so that you can't stuff anything up.. it isn't that much more expensive. Only 15-20 when I checked.

Also don't do the tensioner up to tight when you have the new cam belt on... Just pinch it tight don't force it. The tensioner needs an Allen key so make sure you have a set on hand.. hrmm obviously you will anyway as the cover needs an allen key.

You will have to pull your radiator out.

Either Grab a VL Thermostat from motormates for $25 or buy a genuine nissan one for $50.

I used the aftermarket one and got a dud :) it stays open..

Remember to bleed the head when all is done.

Oh and just a tip to save you stressing.

Remove the Harmonic Balancer before you start undoing the front cam belt cover.

heheh lol.. I remember when I did mine. I began stressing out as I was unable to remove the harmonic balancer. Mine was very very stiff.. So make sure you get thick washers that don't bend like mine did.

Obviously you will need a huge arsed socket to remove the harmonic balancer nut.

sn00p,

the workshop charges $80/hr labour (it was a nissan dealership). I also had to have the front suspension castor rod bushes replaced. all up 4hrs labour. total cost for the timing belt, suspension bushes, water pump and a couple of other bits was $720.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...