Jump to content
SAU Community

Electric drivers side mirror not functioning


chicane
 Share

Recommended Posts

Hi All,

Ever since I have owned my R33 the drivers side electric motor hasn't worked, and I noticed today that the de-fogging function on the glass doesn't work either. Passengers side is fine though..

Have had a look in the fusebox but it all seems in tact. Any ideas people?

:D

chicane

:burnout:

Link to comment
Share on other sites

  • 2 weeks later...

I had a look on the weekend, i can remove the mirror from the door, (pop off the plastic cover and undo the 3 screws), but how do i get in behind the plate glass? i tried popping it off but I didn't wanna bust the glass ;)

Link to comment
Share on other sites

chicane, i have the same prob with my passanger side mirror which made a bad noise when folding out once then never folded out again... but still folds in, i just pull it out by hand, drivers side perfect. I've also tryed pulling it apart and got to the point where u are, ive been meaning to ask nissan for a look at the photos of it, also just curious about the mirror defogging, do you have a switch to turn this on ?

cheers...lenno

Link to comment
Share on other sites

The mirror glass should just pop off - you have to kinda pull quite hard, but it does eventually come off...

There are several screws holding the motor unit in place, just undo them and then you should be able to remove the entire unit from the cover.

Link to comment
Share on other sites

Dave, tnx for your reply.. I'll have another look tonight to see if I can pop it out..

Lenno, Probably suggest you do what Demon Dave has suggested, Have a look at the motor.. I'll take some pics with the digi cam may be able to help ya.

As for the defogging, I read in a Skyline Manual that when the rear demister is put on, the side mirrors have defogging built into them.. and just the rear demister button to the right of the hazard switch turns it on.. On a real cold/foggy morning if I park on my lawn, the side mirrors get fogged up - The passenger side one clears really quickly but the drivers side remains the same..

Cheers

Link to comment
Share on other sites

Hi Lenno,

I have the manual in front of me at the moment: It's the JPNZ R33 Skyline Drivers Manual.. (mate lent it to me, was in his glovebox when he got the car). Page 57:

"Heated Mirrors & Rear Window De-Fogger"

The super sonic mirror will heat up to defog the mirrors. Push button, shown to operate super sonic option first mirror will vibrate to remove any water from the mirrors then heater will switch on. If mirror gets old and scratched and isnt working sufficiently contact nissan to have specified mirror replaced. Dont clean mirrors with an abrasive cleaning material"

also

Pg 51.

"Heated Door Mirror"

When the Rear De-Fogger is pressed the Heated Mirror System will automatically turn on to melt away any ice on the mirrors. This system will automatically turn itself offafter 15 minutes or you can press the Rear De-Fogger switch again to turn off the system manually. Do not try to use the Power Mirror Function while the mirrors have ice on them, always use the heated mirror system first."

Hope this helps!!

chicane

PS. I have a feeling the reason the mirror isnt working properly is because it was bodged by the compliance people when they changed it to a flat glass mirror.. Grrrrrrrrrr :)

Link to comment
Share on other sites

cool... thanks dude, and now that u mention it i'd say the compliance people are responsible for my farked mirror...... keep us posted on how you go getting your mirror apart, and hopefully fixed

catchya

lenno

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • It's generally best practise to run 1x run without VCT enabled, then 1x run enabled till redline. Overlay the two torque graphs and you'll find the desired RPM to turn off VCT. Sometimes, it might be even worthwhile turning off VCT earlier control torque/cylinder pressure and using VCT purely to spool the turbo.
    • They sell them in Malaysia for about $4
    • First time I ever have issues with Amazon, but my wife often tells me to keep an eye out for fakes. It finally got me. I wrapped up the conversation with Gates. The gentlemen I was talking to seemed to hate his job but the response time on their technical support is outstanding. He stated that the hose is marked with some variation of "SAE J30R10" but that if you only purchase a 1 foot length like I did, it is possible to get a cut between markings and have a blank hose. To no ones surprise, he stated the swelling and "gummyness" isn't normal and to replace/buy from somewhere else (He mentioned NAPA). I'll toss a small end of the new one in gas for a few days before pulling the hanger out again, just to be safe.  Hose should arrive Monday. For those running multiple pump in tank hangers, you know the joys of getting them out and back in. I'm surprised I haven't destroyed my level float yet.  Lastly once I wrap all of this up, I'm planning on hitting the dyno again in 2 weeks while I'm on vacation. I realized recently that my VCT is set to turn off at 5000RPM. I'm surprised it wasn't increased while I was on the dyno last. I'm expecting I can increase it to ~6500RPM, if not more. Should hopefully get another 15-20kw out of it. I also want him to revisit my knock thresholds. I'm occasionally getting false knock around 3000rpm. 
    • I don't believe you.
    • All jokes aside, OP they're just called R32 oem rims as you said. The Nissan engineers back in the late 80's loosely copied the design from the Koya Driftek which was designed and produced about 18 years later.
×
×
  • Create New...