Jump to content
SAU Community

Recommended Posts

Hey guys,

Ive been asked by the WRX Club to see if there is anyone who might be able to assisst as back-up recovery for the next track day at Phillip Island on Sat March 31.

Stephen Dean has already kindly offered his services for the day, but in case there are multiple incidences they are hoping to have a second car there on the day.

Its such a big track and in the spirit of giving drivers as much time driving as possible, they are looking for help with this one.

Anyone who might be able to help out, can you post here, or email Lyn at [email protected]

Also, if anyone else wants to assisst with flagging, etc on the day - please email Lyn as above.

Thanks guys and girls,

:(

BEC

Link to comment
https://www.sau.com.au/forums/topic/158511-phillip-island-volunteers-31-march/
Share on other sites

You'll be provided with a handy Russian recovery vehicle with lights and stickers too.

B - I'll be there for this, with both cars - so will help instruct volunteers as well as cheat.

Essentially you park just off the track behind the barriers at a convenient location (if we can get three vehicles then it would most likely be pit exit, Honda and Hayshed) and if you are lucky, the most you will have to do is pickup and deliver the flaggies/equipment during the day. What normally happens is that if a car goes off or stops for any reason, then they are towed by one of the recovery vehicles either back on to the track if they can recover to the pits under their own power, or are towed back to the pits if they can't.

I'll be there with the Navara, but I'd be lucky to break three minutes around the track in it, so having a few extra helpers would be very good.

Want to get close to the track?

Want to get great views?

Want to be right there amoungst the action?

If you answered YES to any of the above, then you want to help out with flagging on the 31st. :happy:

If you are interested in helping out, please email Lyn at [email protected]

:cheers:

  • 2 weeks later...
You'll be provided with a handy Russian recovery vehicle with lights and stickers too.

B - I'll be there for this, with both cars - so will help instruct volunteers as well as cheat.

How are you getting both cars down to the island James?

Do you need a second driver?

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...