Jump to content
SAU Community

Recommended Posts

Hi,

I have a 1999 R34 GT-T Triptronic. and the instrument panel has been playing up. When i am driving the speedo and rev meter max out and than everything on the pannel (speed, rpm, fuel, temp and odo) all go to zero (odo goes blank). After about 5 min the fule and temp usually come on first and than a few sec later the speedo and rpm will come back. When they come back they are way out. I will be doing 60 and the speedo says 120. If i keep driving it will max out again and repeat what i said eairler.

Sometimes the engine light will come on for a few sec after the panel has died for a few mins but than usually about a 30sec - 1min after everything will flick back on again. Under 1 situation i actually lost 1km on my odo.

I only purchased the car about 3 weeks ago and i have taken it back after 1 week coz this happened to me after the first day. They told me the comp needed re-setting or the battery needed changing. I left it overnight and they said they reset the comp. All worked fine till today.

Anyone have any idea what it is and how much AUD$ it will cost to fix.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/158871-r34-gtt-instrument-panel/
Share on other sites

private buy or dealer ?

Dealer. As i said they reset the comp but it did not work. Just want to know if anyone had same prob so they can let me know how to fix. I asked dealer toi replace instrument panel and they said they will do that for me. My cuz had same prob wif his 200SX and he said that waht they did.

Dealer. As i said they reset the comp but it did not work. Just want to know if anyone had same prob so they can let me know how to fix. I asked dealer toi replace instrument panel and they said they will do that for me. My cuz had same prob wif his 200SX and he said that waht they did.

if it's dealer...get them to fix it.. u just had it for a short time.. they should bear the cost not u..

sorry for not being able to help otherwise...

cheers

that's the dealers problem not yours. You can get a nismo dash for $ 5 - 600 :) or the computers rooted wich is more than likely if you reset it and it worked for a while. They need to get a diagnostic machine and see if there is any fault codes. Mght be something simple like a sensor

just another reason to NEVER buy an import from a dealer. Nothing but bad stories.

Buy privately, or import yourself. Across the country, there would be so FEW reputable dealers.

i wonder if they were playing around with odo (via computer), to show a more favourable km reading, and have now rooted it royally

which dealer?

  • 6 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...