Jump to content
SAU Community

Recommended Posts

im thinking of building a r34 sedan drifter

how good does the 34 drift ? will i just get my ass handed to me by some p plater punk in a s13 or 86 ? it seems a little on the large heavy side , am i better off with something smaller lighter and cheaper perhaps ?

thanks

Very well mate , nice balanced car if setup properly i know from experience - my car has a nismo diff - most suspension parts are aftermarket and full adjustable - and just minor other modification - well every time I kick the car out the car handles very well,smooth and balance and doesnt feel like it strugeling im so impress with the car. Thats my input :)

Edited by r34-4dr

awesome!

ill have to have a serious think about 32 or 34 sedan

have come across a good manual 34 , which we all know are rare as , for a decent price so I might try and make the drift budget go further

now how much for a rb26 conversion I wonder

Edited by arkon

I own a 32 4dr.

WOuld rather a 34 4dr. Just more power and looks beter.

My opinion of course.

Don't get me wrong i love my 32 4dr. I just want a change soon.

LOL. By change I mean more power and alot better suspension.

Good luck with it all mate.

Oh and a 26 would set u back a bit i think.

The point is that the RB25 engine and box is a much better starting point than an RB20. The extra torque would more than compensate for the added weight.

They seem to more than hold their own club level events in Japan as well, along with C34/C35 Laurels, Cima's, Aristo's and the list goes on. Night Walkers JZX100 campaigned in D1 for over 2 years at close to 1600kg which is HEAVIER than stock.... Weight isn't the be all and end all.

Edited by Drift_Limo
I would love to see it "Own" my RB20 Ceffy around the track.

34 sedan is very HEAVY and about the only thing nomukens 34 shares with a road one is the body shell and chassis.

haha then obviously you havent seen his D1 Street Legal Car....

4 doors are big heavy, slow, and do not stop when u want them to..... especially the 34... i asked the monkey man why he chooses to drift the 34 and he simply said "im small and i like BIG cars" haha he added "but the car took alot of work and money to get it to a competitive level".

alot of weight means you need alot of power. BIGger brakes, and a higher springrate are also things to consider.

the 32 is just a 2door with two more doors and a little xtra weight, i love them but they hardly qualify as a Sedan....

Edited by 4DoorWhore

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...